Difference between revisions of "Tiny210"

From Geeetech Wiki
Jump to: navigation, search
(Tiny210Mother board)
(Tiny210Mother board)
Line 34: Line 34:
 
== Tiny210Mother board ==
 
== Tiny210Mother board ==
  
# Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
+
# Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,
# AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directlyconnected using a CCD camera
+
and one was lead by SCON interface
 +
# AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly
 +
connected using a CCD camera
 
# RS485: 1 RS485 interface
 
# RS485: 1 RS485 interface
 
# Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the
 
# Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the
Line 41: Line 43:
 
# keys: 8 key
 
# keys: 8 key
 
# RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
 
# RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
# Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
+
# Audio input and output: using the WM8960 professional audio chip, containing Class D
 +
amplifier on-board microphone, and supports HDMI audio and video synchronization output
 
# USB Slave: 1 Road, the USB 2.0 specification
 
# USB Slave: 1 Road, the USB 2.0 specification
 
# Infrared receiver: 1
 
# Infrared receiver: 1
Line 47: Line 50:
 
# Buzzer: 1, control by the PWM0
 
# Buzzer: 1, control by the PWM0
 
# EEPROM:AT24C08 (256 Byte) for I2C test
 
# EEPROM:AT24C08 (256 Byte) for I2C test
# LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" fullcolor TFT display LCD
+
# LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full
 +
color TFT display LCD
 
# SDIO interface: used to connect the SDWiFi module and other
 
# SDIO interface: used to connect the SDWiFi module and other
 
# CMOS Camera interface: used to connect CMOS camera
 
# CMOS Camera interface: used to connect CMOS camera
# RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
+
# RTC clock: with a backup battery (according to different regions or time periods, mailing may
 +
remove the battery)
 
# PCB layer: 2
 
# PCB layer: 2
# PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
+
# PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch
 +
LCD module
 
# Power supply: DC-5V
 
# Power supply: DC-5V

Revision as of 07:43, 23 February 2012

Overview

  • 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
  • 512MB DDR2 RAM and 1GB NAND Flash
  • LCD/Touch Screen, HDMI,TV out, Audio support
  • TF card, USB Host/OTG support
  • Ethernet, WiFi, serial port, GPIO
  • Contain CPU board
  • Linux 2.6.35 & Android 2.3 support


CPU board Hardware info

CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine

DDR2 RAM: 512MB DDR2 RAM, 32bit data bus, 200MHz

FLASH: SLC NAND Flash: 256MB/1GB

Multi-IO:

  • 2 x 60 Pin 2.0mm space DIP connector
  • 1 x 30 Pin 2.0mm space DIP connector
  • 1 x 51 Pin 1.0mm space SMD connector

on Board: HDMI interface 4 x User Leds(Green) 1 x Power Led(Red)

Supply Voltage from 2V to 6V Mechanical: Dimension: 64x 50x 11mm Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7


Tiny210Mother board

  1. Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,

and one was lead by SCON interface

  1. AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly

connected using a CCD camera

  1. RS485: 1 RS485 interface
  2. Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the

DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level

  1. keys: 8 key
  2. RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
  3. Audio input and output: using the WM8960 professional audio chip, containing Class D

amplifier on-board microphone, and supports HDMI audio and video synchronization output

  1. USB Slave: 1 Road, the USB 2.0 specification
  2. Infrared receiver: 1
  3. ADC input: 6 ADC input
  4. Buzzer: 1, control by the PWM0
  5. EEPROM:AT24C08 (256 Byte) for I2C test
  6. LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full

color TFT display LCD

  1. SDIO interface: used to connect the SDWiFi module and other
  2. CMOS Camera interface: used to connect CMOS camera
  3. RTC clock: with a backup battery (according to different regions or time periods, mailing may

remove the battery)

  1. PCB layer: 2
  2. PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch

LCD module

  1. Power supply: DC-5V