Geeetech 405nm Resin for LCD UV 3D Printer Sensitive Resin 500ml 

Description:

This product comes with three features: 

1) High speed adhesion with faster curing time

2) Easy to take out from the plate

3) Higher precision prints and water washable. In addition, no cleaning agent or alcohol required and can clean any residual stains directly with water.

Resin parameter:

Name: 3D printing photosensitive resin

Model: GT-WR01

Characteristic: General type, washable

Surface: Multiple colors

Viscosity（cps@25℃）: 120-150

Curing speed（EcmJ/cm2）: 5.0

Tensile strength（MPa）: 60

Young modulus（MPa）: 2800

Elongation（%）: 7

Impact strength（J/m）: 22

Distortion temperature（℃）0.46 MPa ~ 1.81 MPa: 51~68

Size: 110*100*230

Terms and Conditions:

Shake well before use. If needed wear gloves and mask for safety, the recommended temperature room temperature, to avoid dust and moist environment.

Precautions:

1 No drink.

2 Keep away from children.

3 Avoid eye contact. Please see doctor if you are allergic to it.

Storage

Close the container tightly in a cool, dry and well ventilated area. Storage temperature: The recommended storage temperature is 10-25 °C. Storage temperature should not exceed 25 °C.