• Ship To: US / USD
    Shipping to:
  • 3D Models
  • Language
  • 0
  • Pro W 3D Drucker Prusa I3 DIY kit
  • Pro W 3D Drucker Prusa I3 DIY kit
  • Pro W 3D Drucker Prusa I3 DIY kit
  • Pro W 3D Drucker Prusa I3 DIY kit
  • Pro W 3D Drucker Prusa I3 DIY kit

Pro W 3D Drucker Prusa I3 DIY kit

SKU: 800-001-0494 105 Reviews
New Customers
Ship from: CN
In Stock: Ship in 24 hours
Shipping: $95.80
- +
  • $148.00
  • $139.00
  • $269.00
- Share To -
Frequently Bought Together
Pro W 3D Drucker Prusa I3 DIY kit
  • Geeetech PETG Green 1.75mm 1kg/roll
  • Geeetech ABS Black 1.75mm 1kg/roll
  • Geeetech PETG Transparent 1.75mm 1kg/roll
  • Geeetech Silk Marble PLA 1.75mm 1kg/roll
  • Geeetech ABS White 1.75mm 1kg/roll
  • Geeetech Silk Magenta PLA 1.75mm 1kg/roll
  • Geeetech Sparkly Purple PLA 1.75mm 1kg/roll
  • Geeetech PLA Transparent 1.75mm 1kg/roll
  • Silk (gold+silver+copper) Shiny PLA 1.75mm 0.5 kg Per Spool
  • Geeetech PETG Red 1.75mm 1kg/roll
  • Geeetech Silk Silver PLA Metallic 1.75mm 1kg/roll
  • Geeetech PLA Orange 1.75mm 1kg/roll
  • Geeetech TPU Black 1.75mm 0.4kg per roll
  • Geeetech TPU Transparent Red 1.75mm 0.4kg per roll
  • Geeetech PLA Silver 1.75mm 1kg/roll
  • Geeetech Silk Purple PLA 1.75mm 1kg/roll
  • Geeetech Luminous Green PLA 1.75mm Glow in the Dark
  • Geeetech PLA Yellow 1.75mm 1kg/roll
  • Geeetech TPU Blue 1.75mm 0.4kg per roll
  • Geeetech Silk White PLA 1.75mm 1kg/roll
Total Price
Selected 1 items
Price: $ 125.00
Add to cart
You May Also Like
  • Geeetech A30M Mix Color Dual Extruder 3d Printer, Large Printing Size 320*320*420mm
  • Geeetech A20 3D Printer, Integrated Metal Building Base& Modularized Extruder Wire, build Volume 250X250X250mm
  • Geeetech A20M Dual Extruder, Filament Detector and Break-resuming Function, 250X250X250mm
  • Geeetech A30 Pro Touch Screen 3d Printer, Support Auto Leveling, Large Printing Area 320*320*420mm
  • Geeetech Mizar 3.5-inch Color Touch Screen TMC2208 Slient Driver 3D Printer, 220X220X260mm
  • Geeetech A10M Mix-Color Printing, Filament Detector and Break-resuming Function, Updated 3mm Hotbed
  • Geeetech A10T Three- Colors Printing 3D Printer, 95% Pre-assembled, Build Volume 220X220X260mm
  • Geeetech A20T Triple Color Mixing, Filament Detector, Breaking-Resuming, 250X250X250mm
  • Geeetech A30T Three-Colors Printing, Large Printing Area 320*320*420mm, Quick Assembly
  • Geeetech A10 Pro 3D Printer Breaking-resuming, High Adhesion Building Platform 220X220X260mm
Top Selling
  • 1Acrylic Prusa I3 PRO B 3D Printer DIY kit
  • 2Prusa I3 PRO C Dual Extruder 3D Printer DIY Kit
  • 3E180 3D Printer
  • Product Info
  • Specification
  • Package List
  • Comments


Geeetech I3 pro W 3D printer, is engineered and manufactured by Shenzhen Getech Technology Co., Ltd. Compared with other Geeetech I3 pro printers, the whole frame of I3 pro W, made of high-quality wood, is greatly simplified and portable. Its DIY design would bring great sense of accomplishment when you see a whole machine walking out of fragmentary parts.

Beside, I3 pro W keeps the excellent features of the I3 series 3D printers. Large build volume, high printing accuracy and speed, SD card stand-alone printing, open filament system, smooth and exquisite surface finish and strong structure of the 3D objects, safe and satisfactory printing experience. Paired with EasyPrint 3D printing and control software, Geeetech I3 pro W makes it a reality to easily manage the whole printing job for both newbies and pros alike.  

In addition, with an extra Wi-Fi module, you can upgrade I3 pro W to enjoy the convenience brought by our cloud 3D printing solution. After you configure your Pro W with Wi-Fi hotspot, the cloud 3D printing solution enables you to enjoy free 3D models, direct control over the whole printing process and share your printing experience via App anywhere and anytime. 3D touch will assist you in auto-leveling the hotbed, guaranteeing nice printout.

Unleash your bold ideation with the company of I3 pro W.



1. Open filament system: ABS/PLA/Flexible PLA/ Nylon/Wood-Polymer, providing you with extendable space for your creativity.

2. Self-developed GT2560 control system, compatible with 3D Touch auto-leveling function.

3. Reliable printing quality: layer resolution and tolerance deliver smooth surface finish and durable object structure.

4. Further simplified and stiffened parts make it a reality to assembly and adjust the whole frame fast and easily. Time-saving and full of the sense of accomplishment.  

5. Enhanced stability and reliability:quality wood plates and its reinforcing structure keep I3 pro W running smoothly.

6. Equipped with LCD 2004 panel & SD card, stand-alone printing enabled.

7. Cloud 3D printing solution: use a Wi-Fi module to enjoy 3D printing untethered. (Note: Wi-Fi module is not included in this kit; you need to buy it separately.)

8. EasyPrint 3D App: coming with printing and control functions, a gallery of free 3D models and 3D printing community. Together with Wi-Fi connectivity, EasyPrint 3D App provides you with satisfactory experience of Cloud 3D printing era.

9. EasyPrint 3D: a piece of 3D printing and control software developed by Geeetech for you to set printing parameters, slice 3D models and update firmware. 

Note please:

Stock available  EU UK USA DE warehouse ,there will have remote charges if shipping address is remote. 

Printing specifications:

Print technology: FFF/FDM

Build volume: 200 x200x180mm 

Layer resolution: 0.1-0.3mm

Positioning Precision: 0.1-0.3mm 

Filament diameter: 1.75mm

Nozzle diameter: 0.3mm

Filament type: ABS/ PLA/Flexible PLA/ Wood /Nylon



Operating system: Windows/Mac/Linux

EasyPrint 3D App

Control software: EasyPrint 3D

 File format: g.code / .stl 



Max heated bed temperature:  about 110°C 

Max extruder temperature:  about 240°C 



Power supply:

Input: 110V-220V


Connectivity: USB, SD card (support stand-alone printing),

Wi-Fi (upgradable with a Wi-Fi module)



Body: Quality wood plate of 6 mm thickness (black)

Build Platform: Borosilicate glass + heatbed

XYZ Rods: Wear-resistant, stainless steel  

Stepper Motors: 1.8° step angle with 1/16 micro-stepping

Physical structure: Reprap


Physical dimensions:

Machine dimension: 45 x 44 x 41 cm 

Shipping box: 51x 31x 17.3cm

Net weight: 7.56 kg

Shipping weight : 8.00 kg

1 x I3-W3D printer kit.

1 x Ejector pin (free add-on)

1 x File(free add-on)

1 x Screw-driver set(free add-on)

1 x spool holder(free add-on)

1 x Starter filament 3 meters (free add-on)

1 x Spool holder set(free add-on)

login or register to add your words.

  • KONSTANTINOS SIAMOS | 10/08/2019

    Can I replace the wood body with a acrylic or metallic one? Because the holes do not fit with the rods properly.

    • Jocelin Jia | 10/10/2019

      sorry we do not have acrylic or metallic body replacement for this printer, you can use the tools such as the sickle that come with the printer to adjust it a little bit

  • Juan Cumpián Díaz | 03/01/2019

    Hi I mounted the printer and the extruder don't work, I mean, it heats, it moves but i cant put the PLA through it and it doesn't do anything.

    • Jocelin Jia | 03/11/2019

      please check the feeder kit loose or too tight, thanks

  • Piero Verlengia | 03/01/2019

    Hello, I ordered (02/22/2019) a printer with 3D-WiFi and 3D-touch. Today I received only 3D-WiFi and 3D-touch. How I can have more Information about 3D printer? I sent E-Mail and a message on Skype but noone give me an answer.

    • Jocelin Jia | 03/11/2019

      can you please send me order number?

  • M. Bergmann | 02/17/2019

    I tried everything everything, but the extruder didn't work. If my layer height is higher than 0.3mm the extruder motor skips("click, click, click") I looked at the forum, but the advice still not work.

    • Jocelin Jia | 02/19/2019

      can you please send vidio to jocelin.jia@geeetech.cn? thanks

  • Paolo Pierini | 01/16/2019

    Just received this as a gift (bought from amazon). Installation and preparation all ok. All axes moves very well using the local control panel and the "About command report firmware 1.0.05. I am using a mac, so downloaded the repetier-Host mac from https://www.repetier.com.If I use it (on lpss-serial1) the program says "unknown firmware", shows commands waiting right on connection and does not control anything (heater, hotbed, movement,...). I tried to change all port speeds to no effect. What am I missing? Should not the system be ready for connection?

    • Jocelin Jia | 01/16/2019


  • silvia garcia | 01/08/2019

    El extrusor se atora continuamente. LLevo comprados 5 extrusores y no hay manera de que la impresorafuncione correctamente. ¿Que me recomienda hacer? Acaba de atorarse el último que compré así que no puedo trabajar más con mi impresora.

    • Jocelin Jia | 01/09/2019

      can you please send mails to jocelin.jia@geeetech.cn? please also send picture if possible, thanks

  • anthony rubbo | 01/06/2019

    recieved this product yesterday and began to build it today. one of the parts (NO.38, z-axis couplers) is incorrect. where is the point of contact to get this resolved and the correct pieces shipped?

    • Jocelin Jia | 01/09/2019

      can you please send me order number?

  • Ric Chin | 01/06/2019

    Can i order this printer with a 3mm setup?

    • Jocelin Jia | 01/09/2019

      Now we do not sell 3mm nozzle

  • Luca Colombo | 12/03/2018

    hello , what' the latest firmware for i3 pro W Thanks L.

    • Jocelin Jia | 12/03/2018

      1.1.8, you can find it on github

  • Luca Colombo | 11/29/2018

    hello, I bought a couple of barrel for MK8 extruder and Tin-Bronze M8 for My i3 W. I have to set something in the firmware because of change in the steps? Thanks Luca

  • Juan Manuel Montilla Herrador | 11/20/2018

    AutoHome doesnt work. z and y axes move only a few milimeters and stop. I´ve updated firmware

    • Jocelin Jia | 11/20/2018

      please send vidio and the firmware version you use to victory.lei@geeetech.cn,please also explain the problem, thanks

  • Luca Colombo | 11/07/2018

    hello, I breack the thermo-wire of the hot bed. How to replace it? Thanks

    • Jocelin Jia | 11/07/2018

      two ways: 1 if the thermoter is well , please soldering it 2 if you can soldering it, you can buy a new one and replace it, thanks

  • Edgar Hernandez | 11/02/2018

    i bought this kit. Finally assembled the whole printer and it have a issues.the Z-axis makes a grating sound Any help would be appreciated.

    • Jocelin Jia | 11/02/2018

      please make sure if the thread rods was compeltely touch the motter rods, if yes, please adjust it and do not make the thread rods touch the mottor

  • John Glasgow | 10/25/2018

    Hi, The filament is coming out of the extrude block and dropping on to the prints and damaging the prints, how can I stop this. Thanks John

    • Jocelin Jia | 10/26/2018

      please send vidio to victory.lei@geeetech.cn, thanks

  • John Glasgow | 10/10/2018

    Hi, I bought a new printer and have done some prints with good results, I am now having problems with the X-axis it struggles to move to the right and it then hits the X-min endstop when printing but it comes back to the left OK. I go into the menu Prepare and move the X-Axis with the control on the LCD and it does the same struggles to move to the Right but moves to the left back to zero Ok. What is the problem Thanks John

    • Jocelin Jia | 10/11/2018

      can u please take out the driver of x aixs and replace it with other axis driver and see if work, thanks

      • John Glasgow | 10/11/2018

        Hi, I have swapped the X and Y axis driver and the fault has moved to the Y-axis so the driver is faulty. I have ordered a replacement from Amazon. Thanks John

  • Kev Bertwistle | 10/08/2018

    Hi, New to 3D printing so bought this kit. Finally assembled the whole printer and have a few issues. One of the Linear bearings is faulty and doesn't move smoothly along the rods under the build plate. Both the brass Z-Axis nuts are faulty and the screws cannot connect straight. Once built the X-axis works fine, but the Z-axis makes a grating sound and the Y-axis doesn't respond at all. Any help would be appreciated.

    • Jocelin Jia | 10/09/2018

      order number please

  • Nadine Pohl | 10/05/2018

    Hi. I had a lot of issues with my printer, but unfortunately this one I cannot handle by myself. I have a big problem with the wobble z axis and searched online for a solution. Now I figured out that the threaded rods both are not straight. I have now workbench, so can you please tell me how to solve this issue? (Order nr.: 305-0352462-5933140)

    • Jocelin Jia | 10/06/2018

      please send mails to mike.hu@geeetech.cn, thanks

  • Nicola Regge | 09/28/2018

    In the building manual at page 49 it is writte: M3 x 6mm screw No. 21 8 , but in video i see ionly 6 screws 4 for Z-axis nut and 2 for Linear Bearings. Is it the manual with a mistake or im loosing something?

    • Jocelin Jia | 09/29/2018

      Hi Nicola, Maybe you are loosing something,please emial to :victory.lei@geeetech.cn for help.Thanks.

  • Arturo de Giorgi | 09/10/2018

    I have bought it and I succeeded in mounting it. But it's really hard to print something. I have a Mac and I can't install the driver and I have tried lots of times to connect my computer to the printer but it seems all useless. Do you know where I can find an update list of instructions? Thanks a lot.

    • Jocelin Jia | 09/11/2018

      http://www.geeetech.com/forum/viewtopic.php?f=21&p=27952 please refer to it, thanks

  • Steven Duthler | 08/19/2018

    Newbie to 3D printing, but like a challenge, so I bought this kit. I have it up and running now but ran into some problems along the way: 1. USB cable supplied with kit was defective. 2. Wrong USB to Serial chip listed and driver link in instructions. Eventually found some helpful posts to identify chip on my board and download the correct driver. 3. X-axis motor controller was soldered on to control board backwards. Looked wrong but assumed it was that way for a reason until the motor ran backwards. I removed plastic portion of connector and reversed it. 4. Bad driver board for the Y-axis. Voltage between GND and pot was either 4.98VDC or less than 0.01VDC - nothing between. Ordered replacement from Amazon - working correctly now. 5. Had to do a lot of digging to find information about setting the correct baud rate in the EasyPrint3D. Would have been helpful to have that in the user manual. 6. Bent Z-axis threaded rods. I have been able to straighten them out some. Any chance on having you send me some truly straight ones?

    • Jocelin Jia | 08/20/2018

      Hello please send mails to jocelin.jia@geeetecch.cn,please attach order number pictures ,thanks

  • Sarkas Benamon | 07/31/2018

    Hi, where do I find the QR code on the Prusa I3 Pro W to bind it to the easy3D app?

    • Jocelin Jia | 07/31/2018

      the serial number should on the wifi module, the app need wifi module ,otherwise, can not use it

  • Lee Riddell | 07/25/2018

    Hi, I have just printed the calibration cube and it is longer along one side. is this normal. Also i am having problems with teh print sticking. i have tried the following Decorators tape Lower bed temp hight bed temp higher extruder temp lower extruder temp still having issues with it moving.

    • Jocelin Jia | 07/26/2018

      Hi LEE, Can u please send me picture of the tube you printed to jocelin.jia@geeetech.cn? For the sticking, which filament you use? PLA or ABS,please note that the heatbed need up to 90dgree if ABS , PLA need 60-90degree.

  • Luca Colombo | 06/16/2018

    Hello I am newbie with my prusa i3 W pro. After 10 layers the object detach from the bed and I have to stop the job. There is a topic I can read about this issue? Thansk in advance BR Luca

    • Jocelin Jia | 06/19/2018

      hi Luca, do you use ABS? Please note that the heatbed need up to 90 dgree when print ABS, thanks

      • Luca Colombo | 06/22/2018

        hello Jocelin, at the moment I am printing with PLA

    • Jocelin Jia | 06/19/2018

      hi Luca, do you use ABS? Please note that the heatbed need up to 90 dgree when print ABS, thanks

  • Pedro Flores | 04/12/2018

    Hello, the forums http://www.geeetech.com/forum/viewtopic.php?t=17046 are down and I need to update to the latest Firmware for my new purchased Prusa i3 Pro W, help!

    • Richard Deng | 04/19/2018

      hello,i will aks technician update it, thanks

  • Alberto Gonzalez | 04/10/2018

    The printer don't print with the pc. ¿How do I make? Thank you.

    • Richard Deng | 04/19/2018

      hello, please send mails to jocelin.jia@geeetech.cn, she will reply u soon, thanks

  • Alejandro Ariño | 04/09/2018

    Los drivers de los motores (4988)vienen ajustados?

    • Richard Deng | 04/19/2018

      yes, you can use it

  • Robert Bell | 04/03/2018

    Hi i recently bought this printer but it there is no power from the PSU, all connections are good.

    • Richard Deng | 04/19/2018

      hello, please send a picture of the screen shows and send mails to victory.lei@geeetech.cn, thanks

  • Robert Bell | 04/03/2018

    Hi recently bought this printer but there is no power output from the PSU, so nothing work.

  • Jerry Orthmann | 03/28/2018

    How do I remove filament from the print head?

    • Richard Deng | 03/28/2018

      Hi Jerry,you mean the nozzel is blocked? please heat the nozzel up and use the pin to clean it, if any problems ,please contact:jocelin.jia@geeetech.cn,thanks

      • Jerry Orthmann | 04/09/2018

        Thank you, I got it!.

  • new guy | 03/07/2018

    Why firmware is not up to date? Where the new firmware can be downloaded not something from 2015?!?!?!

    • Jocelin Jia | 03/14/2018

      Hello,the firmware is already updated, please kindly visit our forum to update it. if any problem, please send mails to victory.lei@geeetech.cn. thanks

  • lakhyajyoti gogoi | 02/12/2018

    Can i buy dis printer in India ? Can i install mk8 dual extruder in dis model ?

    • Jocelin Jia | 03/14/2018

      Hi lakhyajyoti,sorry for late reply.I introduce Pro C as Pro C has dual extruder,and we will send it to India.Thanks

    • Jocelin Jia | 03/14/2018

      Hi lakhyajyoti,sorry for late reply.I wanna introduce you pro C,cause pro C have dual extruder.And you can order on the website,we will send it ti India.Thanks.

  • Shane McLaren | 02/09/2018

    Hi Tracking doesn't work. May I have my money back please? Not the full order, just what I paid for tracking. Thanks

    • Jocelin Jia | 03/15/2018

      Hi Shane,sorry for late reply.You can email me if you want a refund or have any problems:jocelin.jia@geeetech.cn,I will help you.Thanks

  • Andrew Moakes | 01/24/2018

    What control software is available for MacOS to use with this printer? Are there setup instructions also for MacOS?

    • Jocelin Jia | 03/15/2018

      Hi Andrew,sorry for late reply.You can download on the software of Hepetier Host.If you have any problems,please email me:jocelin.jia@geeetech.cn,I will help you.Thanks

  • Gerhard Nell | 01/22/2018

    Why so expensive in South -Africa i must pay almost R5000 more

    • Jocelin Jia | 03/15/2018

      Hi Gerhard,sorry for late reply.The price on the website is much cheaper than local agent.Thanks

  • Gerhard Nell | 01/22/2018

    I am not satisfied with it. Due to that there is a distributor in South Africa, they are so so expensive. Charge from you directly is R2157.37 in rand value. In South Africa they charge R7000.00 so total increase of amount they make is R4842.63. Surely i can import from you for R1000 or so. Why must i pay almost R5000 more in South africa.

  • Alexandru Dinu | 10/25/2017

    Hello. My order number is: 20171014231603584. The package identification number is: 538163697143. The issues are as follows: - tracking number is not identified in the system on the site that you have communicated although I have chosen and paid for this option -3D printer arrived without the 3D sensor Toutch Autoleveling even though it was paid -USBee Suite and Pro versions Logic Analyzer was not delivered even though it was paid. How do we fix these problems?

    • Zina Luo | 10/25/2017

      Hi Alexandru ,sorry for the inconvenient here.For the printer we have stock in Germany warehouse so arrange from the local,but for the sensor we just have stock in China so be shipped from China by tracking number :RT367701136HK,pls note with thank.

      • Alexandru Dinu | 10/25/2017

        Hello. The 3D sensor Toutch Autoleveling and USBee Suite and Pro versions Logic Analyzer will be delivered both in the same packet with the tracking number RT367701136HK? In this case, according to the information displayed above on your site, the price for the printer should not be $ 159.9? I paid $189 for the printer + $24.16 for the Auto Leveling Sensor 3DTouch.

    • Zina Luo | 10/26/2017

      Hi Alexandru,yes ,in the same box ,pls note with thank.For the price before you buy you can contract the sales ,if not sorry that .Next time when you would like to purchase something you can contract to the sales for some discount .Pls note with thank.

  • Tim Pehla | 10/22/2017

    What´s the difference to the i3 pro B?

    • Zina Luo | 10/24/2017

      Hi Tim ,mostly the pro B and pro W are in the same just the pro B is acrylic frame while the pro W is the wooden frame .For both of the printers can support the auto leveling by 3d touch sensor ,just depend on which kind of material you are more prefer .

  • Fran cesco | 10/17/2017

    can this printer be upgraded to dual extruder?

    • Zina Luo | 10/17/2017

      Hi Fran ,yes ,it can ,almost same as the pro B to update to the pro C dual extruder .

  • Martin Thomas | 10/08/2017

    Hey guys! This printer is original geeetech? Because price is awesome, and free shipping within Eu this is great. http://www.ebay.com/itm/Deutschland-Warenhaus-GEEETECH-3d-Drucker-Pro-W-upgraded-high-print-precision/182712716993?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

    • Zina Luo | 10/09/2017

      Hi Martin ,yes ,this is our geeetech 3d printer .Also now have stock in EU warehouse .You can place order online and i will arrange ship from EU .have a nice day!

  • Joe Pardue | 09/22/2017

    The User Manual says to use EasyPrint3D. I'm using Windows 10 and it will not run EasyPrint3D. It says it requires .net 3.5, but no matter what I try (and I Googled and tried hours of stuff) it won't run. So how am I supposed to use this machine now that I've built it?

    • Zina Luo | 09/23/2017

      Hi Joe ,you can email to our tech:technical@geeetech.com for help

  • Bruno Miranda | 09/13/2017

    Hi, I Geeetech Prusa I3 Pro W, but I'm not locating the Wi-Fi module to buy. Can you tell me the model for me to locate?

    • Zina Luo | 09/14/2017

      Hi Bruno ,sorry that the wifi module still on processing and will be ready soon,pls note with thank.

      • Fran cesco | 10/17/2017

        the wifi module is still unavailable? otherwise where to buy and install instruction?

        • Zina Luo | 10/17/2017

          Hi Fran ,will be ready soon ,now we are testing all of our printers .Pls note with thank.

  • Peter Somor | 09/07/2017

    Scam! Printer is $128-nice price. Mandatory auto leveling sensor $26-fine Shipping $300!!! Must be a bad joke. Especially claiming "free shipping" on this webpage. Express shipping +$60. Who asked for that addition? To developers- I understand that you need to recover costs and the market is competitive- hence you sell cheaper than competition and get money back on shipping. But such practice is unethical and customers should be warned about your click & bait practice.

    • Zina Luo | 09/08/2017

      Hi Peter ,Thank you for your feedback ,from now on we change the price with the shipping fee .Sorry for the inconvenient before .Do apppreciate to your understanding and supporting here. Sincerely , Zina

    • matt kacz | 04/09/2018

      come on! shut up they also have to make something & this technology is practically costing £0000000 now isn't a typical paper printer a little more expensive!!

  • Jeffrey Strong | 09/05/2017

    Price increases to $153.97 when I add it to the cart, and does not reflect free shipping as indicated in the listing.

    • Zina Luo | 09/05/2017

      Hi Jeffrey ,sorry for the inconvenient here ,and for this printer is not free shipping as the price we give by without shipping ,the shipping fee will no need much .Do appreciate to your understanding here.

  • Tuan Nguyen Thanh | 09/01/2017

    hic... Where is "Free Shipping!"? :(

    • Zina Luo | 09/04/2017

      Hi Tuan ,SOrry that this one is not free shipping and need add the shipping fee when you confirmed the order .The shipping fee also not too much .

  • Zmaro Sobrinho | 08/29/2017

    Can anyone send me sample gcode file for this printer, as I will use cura slicer and need a sample of the file to do

    • Zina Luo | 08/29/2017

      Hi,which gcode file you would like ?You can email to our technican for help:technical@geeetech.com

  • Luis Roberto Lezama | 08/18/2017

    After ensamble... what next? Any tutorial for calibration and start-up?

    • Zina Luo | 08/19/2017

      Hi Luis ,we have details manual ,also assemble vedio and details building instruction,Also if you still have problem you can email to our professional tech for help.

  • AKSHAY GANGWANI | 08/03/2017

    can you deliver this to India or any existing distributor of yours in India ?

    • Zina Luo | 08/03/2017

      Hi Akshay,pls place the order online and we can ship to india by DHL or fedex.Pls note with thank.

  • Montgomery Collins | 06/21/2017

    Hi, does this 3d printer come with a mains plug, and if so what type would it be (I live in the UK)?

    • Zina Luo | 06/22/2017

      Hi Collins ,will arrange the UK plug ,pls note with thank,.

  • Eduardo Cejas | 06/18/2017

    Hello! Do you make deliveries to Argentina?

    • Zina Luo | 06/18/2017

      Hi Eduardo,yes ,can ship to Agentina by EMS .We have a distributor on Argentina too ,you can buy from him.