0

Your Shopping Cart is empty.

  • Mini210S+4.3\"LCD+ Resistive touch screen
    • i i
    • images/l/Mini210s-03_1.jpg images/l/Mini210s-03_1.jpg
    • images/l/Mini210s-03_2.jpg images/l/Mini210s-03_2.jpg
Mini210S+4.3"LCD+ Resistive touch screen
INFO

SKU:700-0422-01

Shipping Weight:1800g

$195.00
Qty:
VS
VOTES

Vote for specials.

0 votes

resin

The Mini210S development board is a powerful Cortex-A8 board offering a Comprehensive solution integrating both hardware and software. It uses Samsung’s S5PV210 microprocessor whose maximum frequency is up to 1GHz.

The S5PV210 integrates the PowerVR SGX540 graphic engine, supports 3D and can drive video playing on screens up to 1080P. The Mini210S inherits all the features and benefits of our popular Mini2440 and Mini6410 excelling in quality and easy to use with low cost.

It is equipped with a 5” LCD, 512M DDR2, 1G SLC NAND Flash, SD WiFi, D type WM8960 audio which supports 8Ω 1W speakers. In addition it has a miniHDMI output, USB2.0 camera and 8x8 matrix keyboard. It also supports power idle mode. These features make it easily and widely used in MID development, Android notepads, auto electronic devices, industrial applications, GPS systems and multimedia systems. It is very easy and convenient for users to refresh the system with various OS via a TF card with our specially developed Superboot

 

System

CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine (smooth 2D/3D, up to 1080p @ 30 fps decoding and encoding)

RAM: 512 MB DDR2 RAM, 32-bit bus

Flash: 4 GB MLC NAND Flash

EEPROM: 256 Byte (I2C)

Ext. Memory: microSD card slot

RTC: Real-Time Clock with battery

 

Video & Audio

LCD Interface: 41-pin (1.0 mm) connector for FriendlyARM Displays (three sizes available; see below)

Monitor: mini-HDMI (type C)

Camera: 2x 20-pin (2.0 mm) CMOS Camera interface, supports two camera modules

Audio Output: 3.5 mm stereo jack, connector for a speaker (Class D Amp)

Audio Input: Condenser microphone

 

 

Network

Ethernet: RJ45 10/100M (DM9000)

 

Multi-IO

Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors

USB: 1x USB-A Host 2.0, 1x mini-USB Slave/OTG 2.0

Beeper: PWM buzzer

User Inputs: 4x push buttons and 1x A/D pot

User Outputs: 4x LEDs

Mobile Industry Processor Interface (MIPI): 24-pin (2.0 mm) header

SDIO Interface: 20-pin (2.0 mm) header, supports SD WiFi module, contains 1x SPI and 2x I2C

8×8 Keypad Interface: 20-pin (2.0 mm) header

GPIO Interface: 10-pin (2.0 mm) header, contains ADC, I2C, I2C, SPI, PWM, IO...

Debug: 10-pin JTAG (2.0 mm)

 

Mechanical

Dimensions: 110 × 110 mm

Temperature: 0°C to 70°C

Power: Regulated 5V (DC-Plug)

Weight: 98g

The board ships with Linux 2.6.28 BSP, WinCE BSP, and Android 2.3 source code, as well as an Android 4.0 test demo.

 

Android

 

Bootloader

Version: Superboot-210

Function: Supports boot and system update by microSD/TF-card (Superboot)

 

Linux kernel

Version: Linux-2.6.35

Compile: arm-linux-gcc-4.5.1-v6-vfp

 

Android system

Android 2.3 (source code)

Android 4.0 (test demo)

 

Device Driver

TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, Keyboard

WiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver

 

File System support

Ubi filesystem, yaffs, ext2/3

 

Function use examples

Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support

CMOS Camera support, 3G support (WCDMA, CDMA2000)

USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen

Dynamic Wallpapers

 

Linux

 

Bootloader

Version: Superboot-210

Function: Support boot and system update via microSD/TF-card (Superboot)

 

Linux kernel

Verison: Linux-2.6.35

Compile: arm-linux-gcc-4.5.1-v6-vfp

 

Device Driver

TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, Keyboard

WiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver

 

File System support

Ubi filesystem, yaffs, ext2/3

 

Graphics system

Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

 

WinCE 6.0

 

Bootloader

Version: Stepldr and EBOOT (source code provided)

Function: Supports download and system update via SD and USB-Quickboot

 

WinCE NK

Version: WinCE 6.0 R3

Function: HIVE register support, BINFS support, SLEEP

 

 

 

 

Device Drivers

TFT LCD/Touchscreen (supports 3.5", 4.3", 7.0", 8.0", 10.4" LCD)

CMOS camera, user key driver, PWM driver, RTC driver, DM9000 driver

SD card support, touch screen support, audio in/out

Serial driver, media support (JPEG, FIMC, MFC, 2D/3D, TVENC,TVSCALER)

WiFi, GPS, GPRS, Camera

USB Bluetooth, USB WiFi, USB mouse, USB key, IE6 explorerD

 

Documents:

Click here to download usermanual

 

 

login or register to add your words.