Your Shopping Cart is empty.

  • GT2560 V3.0 Control Board for A10
    • i i
    • images/l/Geeetech_20181031064441_5.jpg images/l/Geeetech_20181031064441_5.jpg
    • images/l/Geeetech_20181031064441_6.jpg images/l/Geeetech_20181031064441_6.jpg
    • images/l/Geeetech_20181031064441_7.jpg images/l/Geeetech_20181031064441_7.jpg
GT2560 V3.0 Control Board for A10


Shipping Weight:113g


Vote for specials.

0 votes


this SKU 700-001-1109 board is for A10 printer.

GT2560 V3.0 control board, developed by Geeetech, is currently used for A10, A10M, A20 and A20M 3D printers. Here are its main features:

1. Using ATMEGA2560 as its core chip, with its flash memory at 256KB and operating frequency at 16MHz.

2. Compatible with 12V/24V input voltage. Featuring dual power supply, one for powering up the heatbed (15A), the other for other electronic parts (10A).

3. The interface for the heatbed comes with a high-power MOS tube, which is of ultra-low conductive internal resistance. High performance and stable.

4. With 2 interfaces for normally open fans and 1 interface for LED light.

5. Driven by 6 A4988 stepper motors for a single extruder or multiples ones.

6. With extension interfaces for LCD display and SD card. Support both 2004 and 12864 LCD display.

7. Support 3D touch auto-leveling function and filament detector.

8. Using Marlin firmware, stable and easy to operate.

9. Highly integrated and easy to assemble.



 Net weight: 72g

Gross weight: 113g

login or register to add your words.

  • Daniele Amadio Amadio | 11/23/2019

    I need a new motherboard gt2560 v3.1 for my A10. There is any geetech European suppliers? how long would be the ship from CN?

    • Jocelin Jia | 11/23/2019

      hello, you can order this and leave a comment for your order , you need gt2560 v3.1 for A10, will send you the right one. for parcel under 2kg, if you choose express delivery, will need baout 5-7 days by dhl. if you choose registed mail, will need about 20-30 days by China post shipping.

  • Christoph Glania | 11/11/2019

    Hello, is this the correct mainboard for model 800-001-0576 (Europe / Germany)? The main board of my printer shows GT 2560 V3.1! Thank you in advance. Christoph

    • Jocelin Jia | 11/12/2019

      hello Christoph, this is not for model 800-001-0576. you can order this board and leave a comment for you order that you need 800-001-0576's GT 2560 V3.1 , i will change the order for you, send you the right board.

      • Christoph Glania | 11/13/2019

        Thank you, order just placed with comment!

        • Jocelin Jia | 11/13/2019

          yes, i see it, have arranged GT 2560 V3.1 for you , will ship out asap, China post tracking number for your reference: LE058836812CN

  • Noel Kuck | 08/31/2019

    My LCD is only showing two rows of grey squares. Is it an LCD problem or main board? Can I purchase just the LCD? I have refreshed the FW but no change.

    • Jocelin Jia | 09/02/2019

      hello, does the main board lighting normally? you can just purchase LCD, pls send email to sales@geeetech.com , we will arrange offline or you

  • Daniel Nolte | 03/13/2019

    Where can i get the 12864 LCD display for GT2560 V3.0 control board ? Can´t find it here.

  • Stefan Bartsch | 03/12/2019

    Hi Geeetech, i own 3 of your Printers 1x A10 and 2x A10M. I have the Problem on one A10M Mainboard that the hotend always is running. The led is always lightning and the hotend heats up to 260 degree C. Can you send me a new mainboard or an discount so i can buy a new mainboard. I already bought 3 printers off ebay.de, so maybe you can help me.

  • Enry sant | 02/15/2019

    Hi, as per " 4. With 2 interfaces for normally open fans and 1 interface for LED light." pinout? voltage is the same of PSU _ eg: 24V _ 24V or led is controlled, and if yes, how control it? on marlin I don't found it

    • Jocelin Jia | 02/19/2019

      if you need use the cooling fan for parts, it need set in slice software

  • Sergio Carlos Hernandez Ochoa | 02/12/2019


    • Jocelin Jia | 02/13/2019

      may i know your problem?

  • alan shore | 02/04/2019

    hi where can I find the extender board and cable kit looked all over site

    • Jocelin Jia | 02/13/2019

      extension board?

  • John Degnan | 01/26/2019

    I have bought a A10 that came with a GT2560 V3.0 control board. The description above says the board supports both the 2004 and the 12864 LCD display. Is there a special 12864 LCD display that is compatible with t he GT2560 V3.0 control board I can purchase so that I may upgrade my printer? The ribbon cable interface is not compatible with other 12864 LCD displays in the market. Any reply would be appreciated.

    • Jocelin Jia | 02/13/2019

      yes, it suppport but you need change configuration in the firmware

  • Petr Pipek | 01/19/2019

    Hello, does this board support stepper driver TMC2208? thanks

    • Jocelin Jia | 01/19/2019


  • chris vallot | 01/15/2019

    Hello. Is there a way to run all of the fans at 12 volts and all the rest of the electronics at 24 volts?

    • Jocelin Jia | 01/16/2019

      sorry, the board do not support it, thanks

  • aurélie cozette | 01/08/2019

    Hello. Can I use it to change my GT2560revA+ that replace my broken GTM32proVb of my M201 ?(If I change hotend and extruder Extension Board ) Where can I find a display with 1 ribbon ? ( or how to wire a 2 ribbons display on this board ? ) Thanks

    • Jocelin Jia | 01/09/2019

      If you need change the mother board, please note that you need change all wires,. thanks

  • Valentin Guzman | 01/07/2019

    Hi, trying to flash a new firmware it stopped and failed, now the screen doesn't show anything furthermore now EasyPrint does not detect the printer so it doesn't let me use the firmware Upgrador. How can I fix it the get it back to factory settings? Thanks!

    • Jocelin Jia | 01/09/2019

      please use reinstall the firmware, please also note that you need refresh the UI

  • steve boulay | 01/02/2019

    Hi I would like to add a lcd 12864 display to this board on my a10m, what should i buy.

    • Jocelin Jia | 01/02/2019

      Firstly, it can use on a10m but you need set the configuration secondly, you need print or find a LCD frame, the original can not match the size of 12864

  • steve boulay | 01/02/2019

    Hi, where can i find the manual for this board?

    • Jocelin Jia | 01/02/2019

      hello, may i knwo what's your problem of this board?

      • steve boulay | 01/06/2019

        HI, There is no problem, i'm planning to play with it and i need to understand this board. thanks

  • Wolfgang Galkowski | 12/20/2018

    I am trying to upgrade from Rev B to 3.0 Board. The only thing not working is the heatbed. When I plug it in, the printer does nothing when I power it on. When I remove the bed, the printer is booting up fine. At the Rev B board the bed is working... Any ideas?

    • Jocelin Jia | 12/20/2018

      you need change the hotbed wires, thanks

  • Gerrie de Jager | 12/17/2018

    What is the difference between the REV-A and V3.0 PCB's, for instance what do I get extra if I upgrade to a V3.00 PCB?, Thanks

    • Jocelin Jia | 12/18/2018

      can you tell me which modles you use now?

  • julien dugauquier | 12/17/2018

    Hello, I have your 3D printer A10M with Motherboard GT2560 V3. Can you define me the different number of Pin for extruder E2 in Marlin configuration “pins_GT2560_V.3.0.h”

    • Jocelin Jia | 12/18/2018

      Hello Julien, may i know your plan for Pin? thanks

  • Kevin MAGNY | 12/10/2018

    hello, since today I have a problem of displacement in X and Y. (without changing anything, before everything worked correctly) when I request a displacement of 1mm in X and Y, they move 60mm. I change the step / min but it does not change anything. always 60mm, even if I request a movement of 1mm or 50mm.

    • Jocelin Jia | 12/10/2018

      which printer you use? A10 or a10m? thanks

      • Kevin MAGNY | 12/11/2018

        I3 PRO B

  • Igor Rodriguez | 12/09/2018

    Hello my friends, is possible to send me the manual of this board?

    • Jocelin Jia | 12/10/2018

      please refer to wiring diagram, thanks

  • Joseph Bina | 12/06/2018

    Can I use this board on my GTECH I3 Pro-C instead of the A= Board. I need more of those stepper driver mods also.

    • Jocelin Jia | 12/06/2018

      No, please search DKU 700-001-0760, thanks

  • Jocelin Jia | 11/22/2018


  • DARREN TANT | 11/22/2018

    Hi will this accept 2 a motors?

    • Jocelin Jia | 11/22/2018

      this board can use on A10M, support two extruders

    • DARREN TANT | 11/22/2018

      Apologies I meant z motors?

      • Jocelin Jia | 11/23/2018

        it support but need you solder it

  • Gerald Dachs | 11/14/2018

    My GT2560 V3.0 in my A10 is broken: https://www.youtube.com/watch?v=5LIxBn0nOG4&t=15s. Tech support told me that they would send me a new one. After I sent them the ebay article id, they never responded to my emails anymore. Any information would be fine.

    • Jocelin Jia | 11/14/2018

      please send order number here, thanks

      • Gerald Dachs | 11/15/2018

        Thanks for your fast reply. The ebay article id is 232864937534. Seller was geeetech-official.

  • James McElhany | 11/02/2018

    How to upgrade GT2560 V2 to a V3? The A10 I ordered 2018-10-6 Has the version 2 board.

    • Jocelin Jia | 11/02/2018

      you need bought the extruder extension board wires hotend kit mother board

      • David Goadby | 11/05/2018

        I also want to to upgrade my A10 to Rev3.0. What is the part number of the "extruder extension board wires hot end kit".

        • Jocelin Jia | 11/05/2018

          45-001-0478 700-001-1110 700-001-1121 700-0001-1109 and you need send mails to victory.lei@geeetech.cn for some wires, thanks

          • Wolfgang Galkowski | 11/27/2018

            It is: 700-001-1109 (last part number in the list)