0

Your Shopping Cart is empty.

  • Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer DIY kit
    • i i
    • images/l/Geeetech_20161204190955_1.jpg images/l/Geeetech_20161204190955_1.jpg
    • images/l/Geeetech_20161204190955_2.jpg images/l/Geeetech_20161204190955_2.jpg
    • images/l/Geeetech_20161204190955_3.jpg images/l/Geeetech_20161204190955_3.jpg
    • images/l/Geeetech_20161204190955_4.jpg images/l/Geeetech_20161204190955_4.jpg
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer DIY kit
INFO

SKU:800-001-0397

Shipping Weight:12500g

Free Shipping!

$453.00
Qty:
VS
VOTES

Vote for specials.

11 votes

Easy Print

Note please:
1. This product is currently in stock in our US,EU and AU and UK warehouse. For customers from the above areas, your printer will be shipped from oversea warehouse directly.
 If it is out of stock, your printer will be shipped from China.

2. please choose express delivery shipping method for this product. 

Please contact our sales  if you have more enquiries: sales@geeetech.com 

Geeetech Prusa I3 M201 is the 2-in-1-out version of our latest Prusa I3 series 3D printer. This is a fused filament fabrication printer, easy to use and also designed for DIYers and professionals alike. 

    The M201 features our newly engineered the 2-in-1-out switchable hotend, that feeds 2 filaments through one nozzle. With the new 2-in-1-out hotend the M201 can work like a color palette, providing a new level of expression with your prints allowing you to create alternating colors, blending color and gradients. 

    In order to achieve this we optimized the firmware that is driven by our newly developed GTM32 control system, which is based on the STM32 processor and paired with the ARM Coretex M3, running a dominant frequency of 72MHz, greatly improving the overall printing performance. 

    We added a new feature, the Mixer, to the interface to control the percentage of the feed rate of the two filaments. 

       In order to achieve more kinds of printing effects and more gradient styles, we add a practical feature to the latest Firmware to customize gradient template, thus we can set different gradient color effects.

    This M201 3D printer maintains DIY property, with which you can unleash your creativity to refit or modify it as you like. This kit is just the beginning; you can get more out of it. 

Feature:

1.Self-developed control system based on STM32 processor, paired with the ARM Coretex M3, running a dominant frequency of 72MHz, greatly improving the overall printing performance. 

2.Optimized firmware, with new feature of adjusting the proportion of feed rate from two extruders to print items with blending color or gradient colors.

3. 2-in-1-out switchable hotend, works like a color palette, providing a new way to print items in two different colors or gradient colors. 

4. Higher transmission accuracy of Z-axis.

Z-axis adopts high-precision lead screw which is able to convert rotary motion to linear motion. The lead screw features high accuracy, reversibility and high efficiency. It can achieve accurate micro-feeding to ensure printing precision, and high-speed feeding to ensure fast printing speed.

5. 280x210x200mm printing volume, able to printer larger models than most of the I3 printers on the market.

6. Up to 0.1mm printing precision, matching competitors that costs 10 times more on the market. 

7. With LCD 2004 controller and SD card reader, support stand-alone printing.

8. Super-flat aluminum alloy print surface for better adherence.

9. 3D printing filaments compatible: PLA, ABS

For more information, please visit here or visit our wiki.

Note that the firmware is pre-installed, if you need to do modifications, please download firmware here.

*please choose express delivery shipping method for this product. 

Printing specifications:

Print technology:FDM

Build volume: 280 x210x200mm 

Printing resolution: 0.1-0.3mm

Print Speed: 60-110 mm/s 

Filament diameter: 1.75mm

Nozzle diameter: 0.4mm

Filament type: PLA, ABS

Software:

Operating system: Windows/Mac/Linux

Control software: Easy Print,Repetier-Host, Printrun

File format: .STL,G-code 

 

Temperature:

Max heated bed temperature:  about 110 °C 

Max extruder temperature:  about 240°C 

 

Electrical:

Power supply: 

Input: 115V/1.5A or 230V/0.75A

Output:DC24V/15A

Connectivity: USB, SD card (support stand-alone printing)

 

Mechanical:

Frame: Laser-cut Acrylic plate of 8 mm thickness 

Build Platform: Super-flat aluminum alloy+ heatbed

XYZ Rods: Wear-resistant, stainless steel, lead screw for Z axis

Stepper Motors: 1.8°step angle with 1/16 micro-stepping

 

Physical Dimensions & Weight

Machine Dimension: 510x 450 x 450 mm 

Shipping box Dimension: 510 x 470 x 155 mm

Machine Net weight: 9.5kg

Machine Shipping weight: 10.5kg 

1 x   Geeetech Prusa I3 M201 3D printer DIY kit

Introducing geeetech prusa I3 M201

Click here for Building instruction

login or register to add your words.

  • Antonio Posca | 03/01/2017

    Prusa i3 m201 the cooler of the hotend stopped working warming up a lot, this is marked 12 V DC but I have a voltage on the terminals of 24 V DC this is okay or there is something wrong thank you

    • Zina Luo | 03/01/2017

      Hi Antonio, you can list your problem by detail to our technican for help:technical@geeetech.com


  • CICO theMajstor | 03/01/2017

    How do I change filament on M201 ? Any instructions - sugestions ?

    • Zina Luo | 03/01/2017

      Hi,you can check the detail on the manual:https://www.geeetech.com/Documents/Geeetech%20Prusa%20I3%20M201%20manual.rar


  • Antonio Posca | 02/21/2017

    Good morning I'm trying to make my printer prusa i3 m021 and I do not reach a temperature higher than 215 degrees as I solve it

    • Zina Luo | 02/21/2017

      hello Antonio,could you pls list your problem by detail and send email to our technican :technical@geeetech.com he will help you check and give some help.


  • Claude Tran | 02/15/2017

    Hello, if you have plan connection electric for hotend 2 in1 out woek with control board GTM32 pro Vb+5A4988. Thank

    • Zina Luo | 02/22/2017

      Hi Claude ,now the M201 use the control board is GTM32 pro Vb+5pcs A4988


  • Christopher Sheard | 02/09/2017

    Hello I'm going to add a fan to cool my extruded plastic, what voltage should I get? Chris

    • Zina Luo | 02/13/2017

      Hello Chris,the one installed in the printer is 12V ,so you can order 12V one


  • SAJIN SASINDRAN | 01/20/2017

    hello... I am having issues with Z axis

    • rita xiang | 01/20/2017

      Hello SAJIN, What is the issue please? Can u please send details to technical@geeetech.com? our tech support will help you.


  • Göthert Jens | 12/27/2016

    Hello and good day, have a error message at the Repetier Host V1.6.2 and Slic3r V1.2.9 Error: Line Number is not Last Line Number+1, Last Line: 1 What is the error can you help me? Thank you in advance. Jens Goethert


  • JEFF CRON | 12/21/2016

    I have used this printer since April, and have been very happy with it. I would like to convert it to a 2-in-2-out by installing 2 separate heater/thermistor/nozzle blocks on the current hotend hetsink/fan block. Can the control board be be upgraded/flashed with GT2560 firmware for this? Or would I need to also get a new GT2560 board?


  • Ric Chin | 12/19/2016

    Where is the build instructions and wiring diagram for the older board?

    • rita xiang | 12/19/2016

      Hello Ric, please contact our sales for the previous version. sales@geeetech.com


  • Kimble Osteroos | 12/07/2016

    I had to purchase a replacement control board for my M201 printer. I go to install it with the instructions above and find that the wiring instructions on page 72 of the building instructions have a totally different control board shown. This is a change to the instructions from a mere 2 weeks ago. Did you change the control board and if so why wasn't I sent the new board? Where can I find the instructions for installing the STM32 based board?

    • rita xiang | 12/07/2016

      what is your control board, is it with a pro VB? please send email to technical@geeetech.com, we will send you the previous instruction


  • Matte Fugger | 11/27/2016

    Hi Lads, is it possible, someone of you supporters care for the forum? http://www.geeetech.com/forum/viewtopic.php?f=20&t=17279&p=34259&hilit=gmt32#p34259 Thanks in advance.

    • rita xiang | 11/27/2016

      thanks for reaching, yes, there is one tech support caring the forum

      • Matte Fugger | 12/14/2016

        Hi Rita, THX for your fast answer! Could you please doublecheck with the mentioned Tech Support person? The last Update was made: by William » 04 Jul 2016 08:57 As you are still selling the product, I presume there will be some kinda Support. I would like to share my findings, reporting the problems detailed and support you with any further information but no one is answering there. Am I using wrong forum? Thx in advance


  • Heinrich Hoffmann | 11/21/2016

    Hi, How can I connect a third extruder and automatic table leveling function?

    • rita xiang | 11/21/2016

      Hi,how do you want to add the third extruder? where do you want to place the extruder? As to the auto leveling, it is not available for this printer now


  • Tarek Hassoune | 11/12/2016

    Hi I have a prusa i3 M201 for few month now my board driver is dead i have sent 2 emails for tech support asking how can i get a new board but now answer until now any hint where i can buy one

    • rita xiang | 11/15/2016

      Hello Tarek, sorry to hear that, please contact our sales at sales@geeetech.com for the control board.


  • Martin Thielemann | 10/31/2016

    I need to change the size of the nozzle, which is the right model?

    • rita xiang | 11/01/2016

      Hello Martin, this nozzle is not listed on the website, please contact our sales for quote


  • Joe Perinovic | 10/27/2016

    I have a Geeetech Prusa I3 M201 and the Y motor holder, part no. A13 acrylic part is broken. I emailed customer support for information on how to buy and replace this part, but have not received any reply. Can you tell me how to get a new part for this printer?

    • rita xiang | 10/28/2016

      hello Joe, you can contact the sales to send you a replacement or you can print one if you can find a 3D printer , please download the stl file here http://www.thingiverse.com/thing:1107483


  • J.Demin - Royal Sonesta | 10/12/2016

    will you add auto leveling function to this printer?

    • rita xiang | 10/12/2016

      yes, if finished, we will inform you.


  • Ian Sugden | 10/10/2016

    Hi. Do you have any planes to distribute the M201 from your EU warehouse. I live in the UK and postage cost and duty take this printer outside of my price bracket

    • rita xiang | 10/11/2016

      hello Ian, sorry to tell you, this item is not in stock in EU warehouse and We do not have the plan for the moment.


  • Goran Z. Losic | 10/01/2016

    Hi, Geeetech Unassembled Prusa I3 X 3D printer DIY kit is it possible and/or known procedure for extending Y axis to 40 cm length? Thanks

    • rita xiang | 10/07/2016

      yes, you can lengthen it if you like. but we do mot provide the 40cm rod, you may need to find at other store


  • J.Demin - Royal Sonesta | 09/30/2016

    Hello!! If printing volume is not an issue and 2 color-filament is enough, could you please help me to decide between Rostock 301 and i3 201... What are the advantages of this vs the other. Thank you very much!!!!


  • clebersn roberto | 09/22/2016

    The printer problem. printer temperature from 187ºC to 256 all the time. Printer Geeetech Pruse I3 M201 original extruder. could help. thank you so much.


  • Petar Sankovic | 09/20/2016

    Can this printer use only one filament, and not 2 at the same time. Meaning if I want to print in single colour, can I use only one extruder. /cheers

    • rita xiang | 09/20/2016

      Hello Petar, Yes you can use one extruder only if you like or you can use the same color for both extruder. Very flexible


  • Eric Speijer | 09/15/2016

    Just wanted to say. I've had my m201 for a while now, and I'm extremely pleased. I've been able to produce xxx numbers of prototypes and parts too no end. In genaral, if you are planing to get a 3d printer remember there is a learning curve too it. Once you start to get the basics. Thats when the fun starts

    • rita xiang | 09/16/2016

      Thanks for your comment. You can share your great printing parts to us.


  • Canada Jones | 09/13/2016

    Hello! I recently got one of these 3D printers (M201). When i powered it on, it smoked and the eight-legged chip on the back side burned up. Is it possible for me to buy a new one from you, and if not: Is it possible to buy another one of your cards that will let me use my printer, also what could burn that chip.

    • rita xiang | 09/13/2016

      how could it happen, can you please provide me your order number?


  • David Parry | 08/26/2016

    I got on where with the help it was test after test and then I ran out of time so I sent the board back (GTM32) but it seems to have gone astray so where do I stand now. As you don’t even have the boards for sail?

    • rita xiang | 08/28/2016

      Hello David,Can you please provide me your order number cause i cannot track it on our website.

    • rita xiang | 08/28/2016

      Hello David,Can you please provide me your order number cause i cannot track it on our website.


  • David Parry | 08/02/2016

    Is there a way to test Hotbed as not working? I have been on forum but no luck as yet.

    • David Parry | 08/03/2016

      On this bit For GTM32, measure the voltage between the pin1 and any of the other pins(GND), when heated up it is 0V and when not it is 24V I am not getting 24 V and no lights by where the hotbed wires go into. All rests seem ok.

      • rita xiang | 08/03/2016

        Hello David You can send email to our tech support at bruce.wang@geeetech.cn

    • rita xiang | 08/02/2016

      Hello David, you can refer to this post http://www.geeetech.com/forum/viewtopic.php?f=19&t=17039

    • rita xiang | 08/02/2016

      Hello David, you can refer to this post http://www.geeetech.com/forum/viewtopic.php?f=19&t=17039


  • Daniel Leiva Gallardo | 07/27/2016

    I'm having problems to start printing the first layer with the printer, as pellets are formed and stops printing well. What I can do?

    • rita xiang | 07/27/2016

      Hello Daniel, have you calibrate the platform, what is the height between the nozzle and the platform. Here is a printing quality trouble-shooting guide for you to refer http://www.geeetech.com/wiki/index.php/Print_Quality_Troubleshooting_Guide

      • Daniel Leiva Gallardo | 08/02/2016

        I've been testing what it says in the guide, but it seems the problem is that plastic is ejected very slow. I modified the parameters to expel the plastic faster, but still the same. any ideas? Thank you

    • rita xiang | 08/02/2016

      Hello Danuiel, you can refer to this post http://www.geeetech.com/forum/viewtopic.php?f=19&t=17616


  • James McElhany | 07/23/2016

    The M201 I purchased came with a bad controller board. Have been waiting for any support, so far not around.

    • rita xiang | 07/24/2016

      Hello, James, what is wrong with the controller please? You can contact our tech support at bruce.wang@geeetech.cn


  • James McElhany | 07/06/2016

    Hi, been trying to locate a user manual for the M201

    • rita xiang | 07/07/2016

      it is in the Document section, the quick start manual. You can open and save it.


  • Ivan Ortiz | 07/05/2016

    hi, can materials be mixed? , i.e. abs extruder 0, pla in extruder 1?

    • rita xiang | 07/06/2016

      You can conbine them together

    • I D | 07/06/2016

      I mean, the printer came with some filament and I would like to try it combined, is it PLA o ABS ?

      • rita xiang | 07/06/2016

        it is PLA

        • I D | 07/10/2016

          Thanks


  • Bart de Haas | 07/03/2016

    Hello, A few months ago I purchased the m201 printer. I am still having trouble with the mixing hot-end. I would like to chance to a 1 in 1 out hot-end, like a E3D V6. Is it possible to replace the firmware so there is only 1 bowden extruder? Maybe the Prusa I3 X firmware is compatible? Or any other firmware from an existing Geeetech Prusa printer? I look forward to hearing from you about the possibilities. Thank you in advance. Bart de Haas

    • Andrea Lambert | 07/04/2016

      The firmware for M201 is compatible for single extruder, you can still use it.


  • Lior Meridor | 06/14/2016

    can i print with the M201 useing other types of filaments exept PLA or ABS ,like nylon or wood ?

    • rita xiang | 06/15/2016

      Sorry, only PLA and ABS.


  • Stefano Bonvini | 06/02/2016

    I was so proud of my new 3D printer last week, when suddenly the GTM32 control board stopped working. In the meantime I found out this is a proprietary board running a proprietary software, so I need to get a direct replacement or I will have to switch to an open source solution.

    • rita xiang | 06/03/2016

      Hello Stefano, i checked the meials but did not find your mail, can you please send to bruce.wang@geeetech.cn again?


  • Nazario Bevilacqua | 05/31/2016

    Hello May I buy only a new GTM32 board?

    • rita xiang | 05/31/2016

      i am sorry, this board is not for sale.

      • Nazario Bevilacqua | 06/01/2016

        So I have to purchase a new M201 to replace the GTM32 that broke down on my printer?

        • rita xiang | 06/03/2016

          what is wrong with your board please? can you send detailed information to myorder@geeetech.com and technical@geeetech.com, if we detect the board is factory dead, we will send you a replacement.


  • yt lee | 05/26/2016

    If the power to the heatbed is reversed, would it damage the heatbed or the power supply?

    • rita xiang | 05/26/2016

      Yes, there will be damage to both of them.


  • yt lee | 05/26/2016

    Part #2 L470mm smooth rod is too thick to fit into the holes of part # M1 & M2. What should I do.

    • rita xiang | 05/26/2016

      please use sanding paper or the file to polish the MI amd M2


  • Robert Tucker | 05/24/2016

    I cannot get any material out of the print head.

    • rita xiang | 05/25/2016

      Hello Robert, please check this post http://www.geeetech.com/forum/viewtopic.php?f=19&t=17097

      • Robert Tucker | 05/26/2016

        the thermistor reads 30c when in the off state and 200c when turned on. the filaments are were tested before applying heat and the extruders moved them back and forth. I fed the filaments all the way in till the extruder clicked. then applied heat. using the software I tried to get some plastic to come out and it did not. I removed the brass nozzle and there is no plastic in the nozzle. I can also report the filaments are fused inside of the print head. because they will not pull out. any suggestions?

        • rita xiang | 05/26/2016

          did you check the voltage of the motor driver board of the extruder? please contact our technical support at technical@geeetech.com

        • Moisés Santis | 09/01/2016

          Hello Robert Tucker, I have the same problem, did you find out what it could be?


  • Mark Shook | 05/11/2016

    What nozzles does the M201 use?

    • rita xiang | 05/11/2016

      sorry Mark, this nozzle is not for sale online for the moment, if you need, please contact our sales.


  • Darrylle Sunderland | 05/03/2016

    General question: On AliExpress, there is an option to deliver to the UK from Germany (thus no import tax). Can you do this from your company as with AliExpress?

    • Quentin Qiu | 05/04/2016

      Hello Darrylle, sorry to tell you only Prusa I3 X and I3 Pro B can de delivered from Germany.


  • spencer chevalier | 04/16/2016

    is it posible to make direct drive?

    • Quentin Qiu | 04/17/2016

      Hi,would you like to describe your question in detail? Thank you


  • Stephane Bois | 03/20/2016

    I just buy the printer and it is fairly easy to assemble. You might want to see if you have a friend with a leather punch. As you need it to punch the Y axis belt 2.5mm for M3 x8mm screw..That would end up to be frustrating if you where planning a nice flawless weekend assembly. I did encounter minor fit of the assembly but nothing major. They provide a file, but definitively better with a Dremel. The soft rod do not go through the X Axis assembly with a good filling or dremel job. It is a kit remember...Service is helpfull. I am waiting for replacement soft rod as 2 where damaged. An we still work on a bad temp sensor not reporting proper temperature. Can't use it yet...But look cool!I can't wait to have it to work!


  • Mohammad Abu Hasan Khondoker | 03/13/2016

    I have Pro C Dual Extruder printer. I want to upgrade to this M201 version. Can I just buy the board and necessary items to make this upgrade? If so, please let me know the cost as well. Thank you very much.

    • Quentin Qiu | 03/15/2016

      Hello, yes you can. Please tell our sales what items you need and you will know the cost. Thank you.


  • Tatjana Milosevic | 03/08/2016

    Is it better this printer or dual extruder? Can I use PLA material for fundamental part and ABS for support of this part? How much is shipping to Serbia? Thanks

    • Quentin Qiu | 03/08/2016

      Hello, dual extruder are 2-in-2-out, this printer is 2-in-1-out, please choose the type of the printer according to your need. Sorry to tell you that you can not use PLA material for fundamental part and ABS for support of this part. After you adding the product into the shopping cart, please choose the country, and then you can see the cost of delivery. You can also contact the sales. Thank you.


  • Malek Darwish | 02/18/2016

    Can this printer print flex materials? can it print supports with different fillament 1 while the actual print with filament 2? ca i only use one filament with this printer? it says mixer minimum 4%

    • Quentin Qiu | 02/22/2016

      Sorry the functions you said are not available currently.


  • peter cox | 02/01/2016

    hello I have a prusa i3 pro c dual extruder model. Can this be upgraded to the 2 in 1 dual extruder model i3 M201 Where can I purchase the parts ?

    • Quentin Qiu | 02/03/2016

      Hi, sorry to tell you that your pro C can not be upgraded to M201 because there is no room for motor on the top plate of Z axis.

      • peter cox | 02/03/2016

        thankyou If I print out special mounting plates for the M201 motors could I use the 2 in 1 switchable hotend. Can I buy the motors, the hotend and controller seperately from you

        • Quentin Qiu | 02/04/2016

          Yes if you have room for motor you can upgrade it to M201. But you need to change the extruder to 2-in-1-out extruder, change the controller to GTM32 control board, and change the power supply to 24V. You can buy these parts. The 2-in-1-out extruder kit includes the motor. For details and order, please consult our sales. Thank you.


  • GUNNAR-JAN LARSEN | 01/28/2016

    Hello, i was wondering where i cant get hold of spareparts for this machine? The Couplings 5-8mm broke on mine today, for no reason. But i cant seem to find any spareparts online? :)

    • Quentin Qiu | 01/29/2016

      Hi, are you trying to find this one? http://www.geeetech.com/2pcs-reprap-z-axis-couplers-p-631.html

      • GUNNAR-JAN LARSEN | 01/29/2016

        Yes. Thank you Sir :)


  • Peter McHale | 01/27/2016

    Would it be possible to change to the "dual extruder" (2in 2out) after buying this? If so, is the switch (from 2in 1out to 2in 2out, and vice versa) simple enough (How much time might the modification take to make, and would it involve cutting wires or desoldering and resoldering, or anything involved)?

    • Quentin Qiu | 01/29/2016

      Hi you can chat online with our technician through the orange chat window in the bottom right corner of your screen when you are on our homepage. Or you can contact this e-mail sherry.li@geeetech.cn for technical support. You can also go to our forum to refer to FAQ or post your problem. http://www.geeetech.com/forum/ Thank you


  • Boleslav Dobos | 01/24/2016

    Hi, is it possible to print wood,Nylon, Ninja flex or some other special filaments with this printer? If not, are you planning some updates for it? Thank you

    • Quentin Qiu | 01/24/2016

      Hello,you can try to print wood if you are experienced. Other special filaments can not be used on M201. Sorry to tell you currently we don't have an upgrading plan for M201.


  • David McCoy | 01/18/2016

    yes hi, I have a geeetech I3 X and I wished that I would have bought the M201 any way do you have an upgrade kit for my I3 X to your M201 it was surprising to see that after I bought my I3X for 350.00 and then I see that your M210 is only 30.00 more, well I hope that you do...also I have not even started to assemble my I3X yet so if we can do it now is the time to acquire the different parts for the upgrade to the M201. please let me know, thank you.

    • Quentin Qiu | 01/18/2016

      Hello David, yes you can upgrade I3X to M201, they are the same in structure. The control board of I3X is GT2560,but M201 uses GTM32. And M201 is 2-in-1-out extruder. What you have to change are control board, power supply and extruder. If you want to purchase the parts, please contact the sales. Thank you. BTW, I3X is also a good printer to use.


  • Frank Toorenburg | 01/17/2016

    Will there be a autolevel version available soon? It is a big mis here!

    • Quentin Qiu | 01/18/2016

      Thank you for you advice.But sorry to tell you currently we will not upgrade M201.


  • christoph walder | 01/08/2016

    hello, is it possible to use this printer with two seppareted hotends instead of the two in one hotend ? or is this not possible because of the firmware ? thank you

    • Quentin Qiu | 01/11/2016

      Yes, it is possible. But if you change it into dual extruder, the function of printing gradient color and blending color will be lost.


  • TARDITI ROBERT | 01/05/2016

    Bonjour, Suite à mon achat sur aliexpress.com le 04 décembre 2015, j'ai constaté quelques défauts pendant le réglage de l'imprimante. Aprés le montage de l'imprimante Prusa I3 M201,j'ai effectué les réglages et je me suis aperçu que le plateau en aluminium n'était pas plat, et était déformé sur plusieurs parties de la surface. Les tiges lisses de l'axe Y D8mm*420mm sont également déformés sur leur longeurs en forme d'arrondis. Le carton de l'emballage n'était pas abimé et je n'ai rien constataté avant les 1er essais. Merci de me faire parvenir des pièces de rechanges très rapidement afin que je puisse réaliser des objets en 3D. La plaque d'aluminium a les dimensions suivantes : 225 mm * 295 mm avec 4 trous pour la fixation. Existe t il une notice sur le module "l'afficheur LCD 2004" afin de connaitre les diférentes fonctionnalités ? En vous remerciant, Recevez mes cordiales salutations, Hello, Further to my purchase on aliexpress.com on December 04th, 2015, I noticed some defects during the regulation of the printer. After the assembly(editing) of the printer Prusa I3 M201, I made the regulations and I noticed that the aluminum tray(plateau) was not flat, and was deformed on several parts(parties) of the surface as we see on the photo. The smoother(smooth) stalks of the axis Y D8mm*420mm are also deformed on their longeurs in the shape of roundings. The cardboard(box) of the packaging was not damaged and I have nothing constataté before 1st tries(essays). Thank you for sending me spare parts very quickly so that I can realize objects in 3D. The aluminium sheet has the following dimensions(size): 225 mm * 295 mm with 4 holes for the fixation(binding). Exists t he(it) a note on the module " the billposter LCD 2004 " to know diférentes features? Thank you, Receive my cordial greetings,

    • Quentin Qiu | 01/06/2016

      Hello TARDITI, thank your for your detailed comment. You can contact this e-mail sherry.li@geeetech.cn for technical support, or you can go to our forum to refer to FAQ or post your problem. http://www.geeetech.com/forum/


  • Giulio Ranalli | 01/03/2016

    Hi, I need to know if it possible to use the two colours completely separated, with the aim of use one colour for the support of over hanging parts with a different density, and the other colour for the element body. I think that is just a firmware issue...do you considered this? thanks for a prompt answer, I really would to buy this machine.

    • Quentin Qiu | 01/07/2016

      Sorry, currently it is not possible. But thank you for your advice, we will do our best to improve our product.


  • Bart de Haas | 12/16/2015

    Hello, is it possible to upgrade this printer so it can print wood and flexible PLA as well? Thank you

    • Quentin Qiu | 12/21/2015

      Hi,we don't have such kind of upgrade currently. You can contact this e-mail sherry.li@geeetech.cn for technical support, or you can go to our forum to refer to FAQ or post your problem. http://www.geeetech.com/forum/


  • Alexander Gorin | 12/16/2015

    Hello, please, inform me if this printer will have status "Free shippnng" during XMAS sale.


  • Antonio Alcocer | 12/16/2015

    Hello, can you tell me how to calibrate the hot bed

    • Quentin Qiu | 12/21/2015

      Hi you can contact this e-mail sherry.li@geeetech.cn for technical support, or you can go to our forum to refer to FAQ or post your problem. http://www.geeetech.com/forum/


  • Kucar Fenerov | 12/07/2015

    Hi, can i have firmware for prusa i3 m201. board GTM32 my mail is: kucara@gmail.com

    • Quentin Qiu | 12/08/2015

      Hello you can go to this link to download the firmware http://www.geeetech.com/forum/viewtopic.php?f=13&t=17173


  • Aleksandar Yordanov | 12/07/2015

    I have bought this printer, can You send me firmware, stl files and s.o. Thank You

    • Quentin Qiu | 12/08/2015

      Hello you can go to this link to download the firmware http://www.geeetech.com/forum/viewtopic.php?f=13&t=17173


  • Mark Orban | 12/06/2015

    does this printer support wood filament? or flexible pla?

    • Quentin Qiu | 12/07/2015

      Hello Mark, sorry to tell you M201 doesn't support these two kinds of filament.


  • Russell Vickery | 12/06/2015

    My wife ordered my printer 3 weeks ago to Australia it was supposed to arrive next week but it came early. Pitty it's my Christmas present and I can only look at it under the tree


  • Neil Simpson | 11/28/2015

    How long would the DHL delivery take and is this trackible to the UK, I tried to find out on the checkout page but it crashed then gave me an order number but I didn't pay.

    • Quentin Qiu | 11/30/2015

      Hi Neil, it usually takes 3-7 working days.


  • ROBERT SUTTON | 11/28/2015

    Would it be possible to get this unit in Aluminium not acrylic ? It would be the best kit system ever if it was metal.I think I have an introductory voucher and Black Friday credit. Could this order be upgraded to Aluminium? Thankyou

    • rita xiang | 11/28/2015

      sorry that Aluminium frame is not avainable, this acrylic frame is strong enough, do not worry about this.


  • Neil Simpson | 11/27/2015

    The Black Friday deal states that items are shipped for free, im in the UK and at the checkout there is no option for free shipping.

    • rita xiang | 11/28/2015

      Sorry to make you comfused,free shipping is for Exclusions Apply, 3D printers not included, please confirm


  • Santiago Jose Martinez Sala | 11/26/2015

    Hello, i want to know how much it costs a ship to spain

    • rita xiang | 11/26/2015

      hello,just FYI, you can add it to cart where you can estimate the shipping cost. The shipping cost is about 90usd via DHL


  • Trudy DeLeske | 11/25/2015

    Hi, I am thinking of buying this printer, Is this link a video that shows how to assemble the printer? https://www.youtube.com/watch?v=mooLZUi3fGI I am not good at assembling so instruction books are not always good. Thanks for your time.

    • rita xiang | 11/26/2015

      you really do not have to worry about the assembly, it is very easy. apart from the assembly video, we also have assembly manual which you can find in the document section. you can download and read it. before you start assembly, i suggest you read through this manual or whatch the video to get a whole picture of what you will do.


  • steven william | 11/15/2015

    You really did it!that's amazing, i always want to print with a kind of gradients,but i just cannot find one. even though you got a dual extruder printer, the pro C model, but it can only print with two colors. now i can use this pallete-like printer to creat more wonderful items. already ordered one, waiting for it now.hope it won't take too long.Again, thank god, i find it.

    • Quentin Qiu | 11/15/2015

      Thank you very much, Steven.Hope you will like it.