Your Shopping Cart is empty.

  • Geeetech Nozzle Module for E180 3D Printer
    • i i
    • images/l/Geeetech_20171115194404_1.jpg images/l/Geeetech_20171115194404_1.jpg
    • images/l/Geeetech_20171115194404_2.jpg images/l/Geeetech_20171115194404_2.jpg
    • images/l/Geeetech_20171115194404_3.jpg images/l/Geeetech_20171115194404_3.jpg
    • images/l/Geeetech_20171115194404_4.jpg images/l/Geeetech_20171115194404_4.jpg
Geeetech Nozzle Module for E180 3D Printer


Shipping Weight:42g

Quantity in stock:999648


Vote for specials.

2 votes


This nozzle module, easy to separate and assemble, is specially engineered for Geeetech E180 3D printer. A simple sliding joint makes it easy to separate and join the nozzle and printing head together. Four simple steps are OK!

 An elastic reed, instead of a traditional wire, is adopted to connect the heating wire and temperature measurement wire. This new design saves you the hassles of wiring and wire aging.

Its exquisite built-in ceramic throat could avoid additional heat loss while keeping its overall temperature safe and moderate at 100or so. The high-temperature plastic enclosing the ceramic throat renders the whole module safe and durable.

Its standard diameter 0.4mm caters to 3D printing fanciers regular need. Whats more, compared with traditional nozzles, its quality interior structure greatly reduces the rate of clogging or jamming problems, greatly enhancing your overall printing experience.

Altogether, this new nozzle module, simple to use and quality-crafted, proves to be a useful component for your E180.


Simplified design --- just four steps to change the nozzle.

An elastic reed to wipe out the wiring issues.

Exquisite ceramic throat that could avoid additional heat loss as well as keeping overall temperature at 100or so.

High-temperature plastic guarantees the safety and durability of this nozzle module.

Standard diameter 0.4mm and quality interior structure, reducing clogging or jamming issues. 


Nozzle diameter: 0.4mm

Power supply: 12V

Power: 15-18W

Resistance: 12Ω

Material: bronze + ceramic + high temperature plastic

login or register to add your words.

  • Fabio Follador | 11/19/2020

    Is this module also valid for Giantarm D200?

    • Jocelin Jia | 11/19/2020

      hello, it is not valid for D200

  • yukio hashimoto | 01/09/2019

    ノズルが詰まってしまった可能性があります、プリントの途中からフィラメントが出なくなってしまいます。 ノズルの交換方法をわかりやすく説明している文書はありますか?

    • Jocelin Jia | 01/09/2019


  • Jean Paul Carré | 04/08/2018

    its life looks to be low can we have infos to check it pin distribution type of temp sensor value of heater resistance this is the third one declared as out of order reinstalled it several time noway to erase the faulty message thanks

    • Richard Deng | 04/19/2018

      Hello, thanks for your feedback, we have pay attention to this problem and upgrade it, thanks your supporting

  • Heow Heow | 03/15/2018

    Hi, Sorry I don't understand how to change the nozzle, your instructions are not clear, could you post something with pictures on the forum instead?

    • Jocelin Jia | 03/15/2018

      Hi Heow,of couse we will.You can email me:jocelin.jia@geeetech.cn,I will show you pictures and more details.Thanks.

  • Joseph Larson | 02/13/2018

    Instructions on how to install would be appreciated.

    • Jocelin Jia | 03/14/2018

      Hi Joseph,sorry for late reply.It's easy to install.Under the fan,there is a buckle and you need to pull it to the right,then you can install the Nozzle Module.If you have any problems,please email to me:jocelin.jia@geeetech.cn,I will help you.Thanks