Your Shopping Cart is empty.

  • Geeetech A10 open source big building volume 3D printer
    • i i
    • images/l/Geeetech_20181114053736_1.jpg images/l/Geeetech_20181114053736_1.jpg
    • images/l/Geeetech_20181114053736_2.jpg images/l/Geeetech_20181114053736_2.jpg
    • images/l/Geeetech_20181114053736_3.jpg images/l/Geeetech_20181114053736_3.jpg
    • images/l/Geeetech_20181114053736_4.jpg images/l/Geeetech_20181114053736_4.jpg
    • images/l/Geeetech_20181114053736_5.jpg images/l/Geeetech_20181114053736_5.jpg
    • images/l/Geeetech_20181114053736_6.jpg images/l/Geeetech_20181114053736_6.jpg
    • images/l/Geeetech_20181114053736_7.jpg images/l/Geeetech_20181114053736_7.jpg
Geeetech A10 open source big building volume 3D printer


Shipping Weight:9450g

Free Shipping!


Vote for specials.

24 votes


Please Choose:

Filament color


1 A10 avaialble in EU UK USA AU warehouse,will ship order from above warehouse with priority.

2 Printer is free shipping, if shipping address is remote , there will have 30usd as remote fee, this is charged by carrier not by geeetech.

3 You need buy 3d touch and wifi module separately. 

Click here to download:  files/firmware/software


Geeetech A10 3D printer, using open source GT2560 control board, is reliable, cost-effective and easy-to-assemble. Running stably, it aims to provide users with quality printout and satisfactory printing experience.

A10 3D printer can be regarded a miniature of its predecessor A30. Its classic blue and black color combo imparts a touch of solemnity and simplicity, which also embodies our commitment to quality products. The modularized design provides you with an easier assembly experience. 

Keeping Prusa I3 3D printers’ gantry structure and with its build volume as 220*220*260mm³, A10 makes the best of the building platform and gives you a full view of the printing details. Its well-designed extruder greatly reduces the risk of clogging or leaking. The Bowden design of the extruder makes the printing head move lightly and stably, greatly enhancing the printing efficiency. The V-shaped wheels and rails on each axis, made from wear-resistant aluminum profile, could, in a large measure, reduce the printing noise and offer you a quiet 3D printing environment.

Main Features:

1. Its classic blue and black color combo imparts a touch of solemnity and simplicity.

2. With its build volune as 220*220*260mm³, A10 makes the best of the building platform and gives you a full view of the printing details.

3. Featuring printing accuracy of 0.1 mm, A10 delivers exquisite prints with delicate texture, sleek contour and stable structure. 

4. The V-shaped wheels and rails on each axis, made from wear-resistant aluminum profile, could, in a large measure, reduce the printing noise.

5. A10 comes with OPEN SOURCE GT2560 control board, providing limitless space for you to  modify the firmware and tinker with your printer.

Printing parameters

Printing technology: FDM

Build volume: 220*220*260 mm³

Printing accuracy: 0.1mm

Positioning precision: X/Y:0.011mm. Z: 0.0025mm

Printing speed: 180 mm/s (max)

Filament diameter: 1.75mm

Nozzle diameter: 0.4mm

Filament: ABS / PLA /flexible PLA/wood-polymer/PVA/HIPS/PETG, etc.


Max temp for hotbed: 100℃

Max temp for extruder: 250℃

Software resources

Operating system: Windows, MAC, Linux

Control software: EasyPrint 3D, Repetier-Host, Simplify 3D, Cura, Slic3r, etc.

Remote App: EasyPrint 3D App (with an optional 3D WiFi module)

File format: .STL, G.code


Power supply: Input: 115V/230V

            Output: DC 24V, 360W

Connectivity: Wi-Fi (with an optional 3D WiFi module), USB cable, 

SD card (support stand-alone printing)

Display screen: LCD 2004


Frame: Aluminum profile

XY Rods: Wear-resistant aluminum profile

Z axis: Lead screw

Stepper Motors: 1.8°step angle with 1/16 micro-stepping

Physical Dimensions & Weight

Machine Dimension: 478 x 413 x 485mm³ 

Shipping box Dimension: 500 x 470 x310 mm³

Machine Net weight: 7.6kg

Machine Gross weight: 9.45 kg

login or register to add your words.

  • Ralf Miunske | 03/04/2019

    For the owners of the Geeetech A10 I have created a printable mounting for the 3DTouch: https://www.thingiverse.com/thing:3464552 It's designed so that the offset to the nozzle is precisely aligned automatically. Feel free to share the link anywhere you want and have fun using the 3DTouch.

    • Jocelin Jia | 03/11/2019

      thanks very much for sharing

  • Tino Tausch | 02/23/2019

    Hello =) My parts fan is inconsistent in speed while printing (it goes on and off, but i set it in slicer to 100%). Any advice? I already tried an other fan. But still the same behaviour.

    • Jocelin Jia | 03/11/2019

      cooling fan for printing parts?

  • Jocelin Jia | 02/19/2019

    on the top of the website, find "download"

  • Garcia Lupe | 02/17/2019

    Where can i find the original firmware that came with my Geeetech A10? Thank you

  • Silvia Regoli | 02/13/2019

    Hello, I want to buy this printer with other components of the website. I want to know if the shipping cost is free to Argentina? Due to import limitations, I would like you to recommend me if I should add something else to my shopping cart. What better hotel do you have for the Geeetech A10?

    • Jocelin Jia | 02/13/2019

      Hello . please send mails to jocelin.jia@geeetech.cn,she will make an order for u, thanks

  • Cristiano Picco | 01/29/2019

    Perchè ho dovuto pagare le tasse doganali? Non è corretto!

    • Jocelin Jia | 02/13/2019

      hello, my colleague reply you with mails, thanks

  • Joseph Bina | 01/28/2019

    Been printing 5-8 Hrs a day when I can. I think my Extruder pinch roller getting weak . Will probably order the Metal upgrade kit :))

    • Jocelin Jia | 02/13/2019

      please send mails to jocelin.jia@geeetech.cn, thanks

  • Euan Rundle | 01/24/2019

    Hi, are the electricals and the motherboard enclosed? Thanks

    • Jocelin Jia | 02/13/2019



    Hello . free shipping to Russian Federation is real??

    • Jocelin Jia | 01/09/2019

      Hello dear, this is not real, need check it depends on address

  • Pablo Peña Sereno | 01/08/2019

    Hi, i ordered the printer on past 21 of december, i bought it from Spain in the EU warehouse, i don´t have news since i ordered it, What should i do? I sen a mail to the support team and i don,t have answers. Thanks.

    • Jocelin Jia | 01/09/2019

      can you please send me order number here, thanks and waiting~

      • Pablo Peña Sereno | 01/12/2019

        I just received my printer but without the 3d touch, the PLA and the wifi module that i ordered, how can i contact you to solve this problem? Thanks

        • Jocelin Jia | 01/16/2019

          can you please send me order number? thanks

  • Juan Manuel Calderon Berrocoso | 01/05/2019

    Hello, I ordered on 12/11/18 and paid for the tracking number. Today (25 days later), the order still processing and I dont have the tracking number.

    • Jocelin Jia | 01/09/2019

      Sorry, can you please send me order number, thanks

  • Juan Manuel Calderon Berrocoso | 01/05/2019

    Hola, he comprado una impresora el 11/12/2018 y el pedido todavía sigue procesándose. Envíe una consulta hace unas semanas y me dijeron que se repondría stock para finales de diciembre. Estamos a día 5 de enero y no responden a los mensajes que les mando, el pedido sigue procesandose y no me envían el número de seguimiento. Me siento profundamente decepcionado con la mala gestión que está teniendo el envío y espero que el problema se resuelva cuanto antes.

    • Juan Manuel Calderon Berrocoso | 01/12/2019

      Me ha llegado hoy la impresora, sin embargo faltaba el sensor 3D que he comprado junto a ella. Además, después de conectar la impresora, realizar los preajustes y calentar la cama, la fuente de alimentación ha fallado y ahora no funciona la impresora. Esto es vergonzoso, espero que resolváis pronto mi problema.

      • Jocelin Jia | 01/16/2019

        can you please send me order number? do you switch the voltage to your country use? thanks and waiting~

        • Juan Manuel Calderon Berrocoso | 01/18/2019

          He puesto correctamente el voltaje y he hablado por skype con sales03-geeetech, a quien he enviado un vídeo del problema, respecto a lo que me ha respondido que van a enviarme otra fuente de alimentación junto con el sensor 3D que no me enviásteis a pesar de que lo pagué junto a la impresora y el número de seguimiento. Esa respuesta me la dió hace dos días, sin embargo aún no he sido notificado del envío del paquete y no responde a mis mensajes por skype. Espero que lo enviéis pronto, puesto que esto roza lo ridículo y comienzo a sentirme estafado.

          • Jocelin Jia | 01/19/2019

            Hello , Can you please tell me order number?? if he told you send new replacement, you will get it but it need a little time to process it as Chinese new year is closing. factory now is understaffed, thanks your patience and understanding~

  • Ingo Paris | 12/31/2018

    Hello,I have a Question: I just mounted the A10. The print head is very loose and wobbly. The super plate has a clip in each corner, I remove it, slips the glass plate on the heatbed. Under the glass plate is double-sided adhesive tape. I have to remove the clips, and do I have to stick the glass plate on the heating bed??? Top Greets and Happy new year

    • Jocelin Jia | 01/02/2019

      Hello Ingo, Please tight the printing head,in the meantime, please use the insulation clips to clip the bed

      • Ingo Paris | 01/04/2019

        hello jocelin, thanks for the answer. but how and where do I tight the print head

  • Nick Karletsos | 12/30/2018

    Hi Jocelin, I recently purchased an A10 printer, The axis are not working correctly they are slightly misaligned.So when i print the prints come out of the center. I tried to adjust the offset but the eeprom is most likely "not writable" , Can you please prompt me in the right direction to get the issue sorted? I bought a 3d touch sensor, if i will re-flash the board with a new firmware if this will correct the issue. Is there a guide in updating the firmware? Thanks in advance. Nick K

    • Jocelin Jia | 01/02/2019

      hello Nick, Can you please send me a vidio to jocelin.jia@geeetech,cn,thanks

  • Ingo Paris | 12/30/2018

    Hello, I just mounted the A10. The print head is very loose and wobbly. The super plate has a clip in each corner, I remove it, slips the glass plate on the heatbed. Under the glass plate is double-sided adhesive tape. I have to remove the clips, and do I have to stick the glass plate on the heating bed???

  • Gabriel Piacenti | 12/27/2018

    I got the printer it is works great. I only got one issue and it is that when I home the printer the home position happens to be off the build plate (front right of the printer). Looking around the X and Y endstops I noticed they are just screwed into the frame so I was wondering if there is a way to adjust them or if I have to do something else to extend their reach.

    • Jocelin Jia | 01/02/2019

      can you please send me a vidio to jocelin.jia@geeetech

  • Guy Massicotte | 12/19/2018

    554 5.7.1 _jocelin.jia@geeetech.cn_: Relay access denied The error message that your server return when I was trying to reply to you for the board replacement. Here my Order NO:20181123160113799 Thanks

    • Jocelin Jia | 12/20/2018

      Hello, sorry, i got your mails thanks

  • jose ignacio Decima | 12/17/2018

    Hello I have one problem with the 3dtouch in this machine, i already use the 3dtouch in one prusa i3 pro b, but in this machine is no working correctly. I power one the machine and the blue led is on but the red led blink all time. Then i start the printing the machine check the bed and start the print but the led blue is in on state and red blink without error but then the red led start blinking in the error mode adn the blue is off. In other machine the 3d touch work correctly, i have two 3dtouch and is the same in both

  • Joseph Bina | 12/16/2018

    I did find some of the spare parts I was looking for on you web page. Have ordered them but still need the 2 LCD Mounting bars for my GT I3 pro C LCD screen.

  • Joseph Bina | 12/13/2018

    :)) me again ?? Why is it so hard to find to Download the EasyPrint Software ??.Also could you put some smaller sample Gcodes on the SD card, The Dog is great but takes almost 3 Hr,s ??

    • Jocelin Jia | 12/13/2018

      Hello Joseph, Phone or pc? for the samples, you can download it on thingverse, there have a lot of samples for you.For the printing hours, you can speed up printing speed to save time, however, you may need consider printing quality into consideration, thanks

  • Joseph Bina | 12/13/2018

    I tried to go to the EasyPrint site you have listed on the Quick start instructions for the A10 . Vut got 404 ??. From your website the motors on my A10 are SKU-700-001-0941//42SHD0034-20B..300NM. I have ordered the SKU-700-001-0283 ..500 NM. Who do I order from to get spare parts for my A10 and the I3 ProC..

    • Jocelin Jia | 12/13/2018

      http://www.geeetech.com/forum/viewtopic.php?f=48&t=61345&p=84886#p84886 please visit here for easyprint. http://www.geeetech.com/forum/viewtopic.php?f=48&t=61345&p=84886#p84886 here is the motor for a10 sku:700-001-0941 if you need other parts, please send mails to jocelin.jia@geeetech.cn, thanks

  • Holger Schöpgens | 12/13/2018

    Hello,i measure the blue connector, 1.pin=minus;2.pin=5.0V;3.pin=0V;4.pin=0V;5.pin=4.28V. Voltage Output from PSU=24,4V.Please support,thanks. Holger

    • Jocelin Jia | 12/13/2018

      Hello Holger, please send mails to jocelin.jia@geeetech.cn(include order number, problem ) thanks

      • Holger Schöpgens | 12/13/2018

        hello, my order nr. :Order NO:20181126215424798 Order Time:2018-11-26 21:54:24. So the A10 is since two weeks at my office, but nothing happens. I had aswered all your questions, but instaed of a solution i receive new questions from your side. So what you want to do, that i can work with the ptinter? Best regards from germany. Holger

        • Jocelin Jia | 12/14/2018

          will check and reply you,thanks your patience

  • Joseph Bina | 12/09/2018

    What stepper motors are on my GT -A10. Can I get a stronger one for the "Y" drive. Is the NEMA 17 with skidproof the same as on the A-10 ??

    • Jocelin Jia | 12/10/2018

      please search key word:motor and find the one, it available online now, thanks

  • Holger Schöpgens | 12/07/2018

    hello,the hotbed don't heat, and on the extruder extension board i don't know, where i should measure the voltage. on the green conector for the hotend there is no power.The fuses on the GT 2560 are ok. Please help

    • Jocelin Jia | 12/10/2018

      Firstly, please take out the clips on the bed secondly, please measure PSU output if comes with voltage thirdly, please measure the blue connector of the extension board, thanks

  • Mathias Kahn | 12/06/2018

    Hi Ordered on 11/30/2018, with paid option for tracking number. Now 12/06/2018 (6 days later). No news, no delivery. No tracking info appears in the order.

    • Jocelin Jia | 12/07/2018

      it send from FBA Amazon, thanks

  • Holger Schöpgens | 12/05/2018

    Hi, i have disconnect the thermistor and the result is the same. If I try to power on the nozzle and the bed via Cura, display says Error mintemp bed. Please help

    • Jocelin Jia | 12/06/2018

      Does the hotbed heat up? please measure the voltage of the extruder extension board.

  • Holger Schöpgens | 12/04/2018

    Hi, I got my A10 on Friday, build up was simple, but when i start the system, the display shows a nozzle by 355° and bed by 2°. I can run the axles via cure, but not via Repetier Host. Further in your documents is a FTDI driver recommend, but on my laptop (win10) is the driver CH 340. What is the right driver. How can I fixed the problem with the wrong temperature? Mainboard was GT 2560 V3.0, HW Ver. V2.1. Thermistors in the display was EPCOS 100K. Please help. Thanks in advance

    • Jocelin Jia | 12/04/2018

      Hello Holger, Thanks your feedback, please check the thermistor if stick well or wires is loosing. if not loosing and stick well, please do not connect the thermistor of the hotend, then check if the screen shows the same tempt. thanks and waiting for your news~

  • Joseph Bina | 12/01/2018

    Got my A10 today and is up and running :)). Did have a startup problem, Tell everyone to make sure to have the right Voltage set on the Power supply. I thought I had the control ribbon cable in wrong . Picture was hard to see. Could not get the Dog to stick to the bed. Had to use blue painters tape, Raise the fil. temp to 215 bed temp to 60. At 60% done the Dog pulled off the bed. I was running on the dining room table under a ceiling fan getting too cold. This is a GREAT product Everybody should have one :)).

    • Jocelin Jia | 12/03/2018

      Hi Joseph, Thanks your comments, if the cable wrong, please send picture back to jocelin.jia@geeetech.cn, we can send replacement. For the sticking problem,please lower the first lawyer speed to 30-45mm/s and add the heatbed to 70degree, then no need the tapes

      • Joe Dwyer | 12/11/2018

        Put my A10 together today and had no startup. Thanks Joseph Bina for your message. The voltage setting was exactly the problem. Other than that, assembly was easy and technical tolerance exact.

  • Moitrier Guillaume | 12/01/2018

    Hi, I'm extremly impressed by the quality of your product so far. It's been a real piece of cake to assemble, plug and tune ! After a few years with a crap Prusa i3, I'm living again. Anyway I have a question : Do you have a Marlin in 1.1.9 version WITH 3D Touch already activated inside ? I'm using a 1.1.8 version of Marlin from GitHub, working fine, but a I like to have the last versions. Thanks and I'm planning of buying a second A10 in a few months ! I LOVE IT LITTERALY !

    • Jocelin Jia | 12/03/2018

      Hello Moitrier, Thanks your good feedback, please download the firmware on github, the firmware already include auto leveling settings

  • James McElhany | 11/27/2018

    When loading new firmware where is the Enable babystep Z located?

    • Jocelin Jia | 11/27/2018

      click lcd twice then the you can see the babystep and you can adjust it

  • Holger Schöpgens | 11/26/2018

    hello, is the A10 i had ordered now with the GT 2560 V3?

    • Jocelin Jia | 11/27/2018

      yes, it's V3 board

  • Djordje Nikolic | 11/25/2018

    I would like to know what I will get with 3d touch? Also in this version of printer do I have to do manual levelling or ...?

    • Jocelin Jia | 11/26/2018

      the printer support auto leveling but u need set it in firmware, thanks

  • James McElhany | 11/25/2018

    I have not changed the nozzle, it is leaking abover the heater block. I have tried tightening it without any luck. I have the old version of the hotend. Also there no wat to attach the 3d touch to the hotend fan housing

    • Jocelin Jia | 11/26/2018

      please send some pictures and order number to jocelin.jia@geeetech.cn

  • Cristian Minguez | 11/22/2018

    Hi. I'm interested in buying the printer, but I have some questions: I wanted to buy it from Spain in the EU warehouse. More or less, how long would it take to receive it at home? Is the version updated with the new improvements? Best Y axis Support for the self-leveling device. Filament detector. ... Thank you.

    • Jocelin Jia | 11/23/2018

      Hello Cirstian, the printer include filament sensor support auto leveling power resuming, it can arrive your door with 3-5days from eu warehouse, thanks

  • James McElhany | 11/22/2018

    The hotend is leaking filament, have tried tightening the cooling fin and tip without luck. Any subjections?

    • Jocelin Jia | 11/22/2018

      are you changing the nozzle without heating? Please note that you need heating the hotend then exchange the nozzle, thanks

  • CELLOTTINI roberto | 11/22/2018

    hello what version can I get if I buy now? has the filament sensor? thank you

    • Jocelin Jia | 11/22/2018

      yes, the printer now support filament sensor power resume as well as remote control, thanks

  • Nicola TAU | 11/21/2018

    Ordering A10 from Italy which warehouse should I choose AU or EU? And is 171.99 € the final price or should the 15% discount still be taken off? Thank you very much.

  • verta breaker | 11/21/2018

    spent a week trying to get my a10 working then i updated to firmware 1.1.9 and now it works better wish geeetech would officially put out the update so many great features.

    • Jocelin Jia | 11/22/2018

      thanks your suggestion, i will submit it to management, thanks

  • Antonio García | 11/20/2018

    Which type oz "Z Axis: Lead screw" does the printer use? It would be useful to know the metric in order to calculate the printer's magic numbers.

    • Jocelin Jia | 11/20/2018

      T8 lead screw

  • jose ignacio Decima | 11/15/2018

    Is possible buy the hotend for use 2 colors like the a10m , can you share the link . thanks

    • Jocelin Jia | 11/16/2018

      1 you need change the mother board to support two extruder. if you do not change the mother board, you must have the ability to solder the another empty port by yourself. 2 you need change the hotend 3 you need check your printer if have extruder extension board 4 you need change the extruder wires https://www.geeetech.com/2-in-1-out-dual-extruder-mix-color-hotend-for-a10m-a20m-m201-p-1038.html https://www.geeetech.com/geeetech-extruder-extension-board-for-a20-a20m-a10-a10m-p-1042.html https://www.geeetech.com/gt2560-v30-control-board-p-1040.html

  • Tino Tausch | 11/15/2018

    Hello, i have issues with my new A10. After a calibraion, the printer (the nozzle) drives allways about 3 mm over the printing bed. Even if i use the original gcode on SD-Card who came with the printer. So i cant print, because the z-axis is about 3mm tohigh. I allready reset the settings and calibrate it many times. All axis are on 0.0 mm in the settings of the printer. Please help me. Thanks you!

    • Jocelin Jia | 11/15/2018

      please send me a vidio to jocelin.jia@geeetech.cn, i suggest you relevel the printer

    • Tino Tausch | 11/15/2018

      I got it. I already mounted the 3D-Touch on the machine from the beginning and leveled it manually. With the plugged Touch-Sensor the machine had a different behaviour (by drive at home) and printed allways 3mm to hight. Unfortunately I now have big scratches on my plate after removing the sensor for testing. It seems that the firmware does not support the sensor yet (i have a new version of A10 mith filament-detector). Dear Geeetech, why don't you tell your customers that the firmware doesn't support the included sensor, before they buy it together? Now i have trouble to print on my scratched plate.

      • Jocelin Jia | 11/16/2018

        Firstly, the printer must level the bed before printing, if not leveling well, it will scratch the bad. Secondly, the firmware support auto leveling but it need you to set it in firmware, if you do not know how to set it, please download the firmware on github directly and reinstall the firmware again,thanks

        • Tino Tausch | 11/16/2018

          There are no notices to set the auto leveling in the code of the firware, before mount the 3D-Touch to the printer. Steps to procedure: - mounting 3D-Touch to the printer - level/aligned the Printer (manually) - start printing --_ at this point the printer have a strange behaviour: it drive 3 mm to high and starts to print (on every print) - according to the knowledge i decide to disconnect the 3D-Touch - after this disconnect i try to print again --_ at this point the strange behaviour is gone. The drive to home was now normaly but it has printed to deep and scratcheed my plate. - after this shock i relevelt/aligned the printer without 3D-touch and it worked I did not find any information about autoleveling in the print settings. Also no information that the 3D-Touch is not plug and play when delivered with a new device.

          • Jocelin Jia | 11/17/2018

            The reason for this problem is not setting well in the firmware, please kindly search the firmware which is setting well on github, thanks

          • Stanko Mamula | 11/27/2018

            For 3d touch sensor You must do additional few steps. After homing Z axis with 3d touch, you must go to menu: Prepare, move axis, Move z, Move 0.1mm then put sheet of paper beneath nozle and with button move Z axis down until nozzle gentle scratch paper. Write current position from display (should be some negative number) After that go to main menu, and from there: Controll, Motion, Z Offset And change this this position with value found in previous step. Whole process on video: https://www.youtube.com/watch?v=_RtsZDbR2po

    • Joshua McDonald | 11/15/2018

      uhh did you try just turning the thumbwheels?

  • Markus Fäth | 11/15/2018

    Hi on my A10 the SD Card reader don't work i have tried everything to fix it but it shows NO SDCARD ever can you help me?

    • Jocelin Jia | 11/15/2018

      1 please change another SD card to test if the sd card is well. 2 please check the SD card module is good condition.

  • Darren Emily | 11/14/2018

    Does it come with the ability to save after power failure and then the filament sensor?

    • Jocelin Jia | 11/14/2018

      yes, it include

  • Maryse Lajoie | 11/11/2018

    Came With US plug?

    • Jocelin Jia | 11/12/2018

      we will send the plug based on the shipping address, thanks

  • jose ignacio Decima | 11/10/2018

    Hello i have a new A10 with the extruder board. I want to add the 3d touch but i don't know exactly the pin that i need. Can you share the specification for the extruder extension board. Thanks

    • Jocelin Jia | 11/12/2018

      For the 3d touch, you need set the firmware.For the extension board, you can search SKU:700-001-1110

  • Gwendal Mousset | 11/08/2018

    Which revision of the motherboard comes with this printer ? A, A+, B or 3 ? It's important for me, thank you.

    • Jocelin Jia | 11/09/2018

      GT2560 V3

      • Gwendal Mousset | 11/09/2018

        Thank you for your answer. I've order the printer :)

  • Stefano Coruzzi | 10/28/2018

    Hi, the A10 on your Amazon shop is reported having the recovery in case of power outage, but this is not mentioned here. Is is a different version or one of the two description is wrong/incomplete? Furthermore, in the comments here it is mentioned that it has also the filament sensor. Is that true if I order one on this website? Thank you.

  • Roland Truter | 10/27/2018

    My cooling fan outlet broke. Can you please share the STL to reprint?

    • Jocelin Jia | 10/29/2018

      can u send a picture of the parts to jocelin.jia@geeetech.cn, thanks

  • Paolo Fasano | 10/23/2018

    salve la mia a10 ha problemi di etrusione no estrude bene ho cambiato l'ugello ma niente non stammpa aiuto

    • Jocelin Jia | 10/23/2018

      1 please check hotend if clogged 2 please check the tube if well inserted 3 check if the feeder kit is skipping. if still have problem, please send mails to victory.lei@geeetech.cn, thanks

    • Paolo Fasano | 10/23/2018

      Ciao le ho provate tutte ho pulito due volte l'estrusore l'ugello ma niente come se non arrivasse abbastanza materiale

      • Jocelin Jia | 10/23/2018

        send mails to victory.lei@geeetech.cn, thanks

  • Alejandro Yacono Esmendi | 10/19/2018

    My A10 came with a filament sensor, but no instruction on how to install it. Please share a photo with the sensor installed and another one with the filament loaded. Thanks.

    • Jocelin Jia | 10/19/2018

      please check mails, thanks

  • michele salvucci | 09/29/2018

    ragazzi aiuto, mi si e piantata la scheda madre non so come fare a ripristinarla, intanto ho chiesto il cambio sperando sia quella

    • Jocelin Jia | 10/05/2018

      please send more details to jocelin.jia@geeetech.cn, thanks

    • Riccardo BRAMATI | 10/19/2018

      Ciao scusa, sei italiano presumo, mi dici quanti giorni ci ha impiegato ad arrivarti e se ci sono oneri doganali? Grazie

      • Luigi Manfellotti | 10/19/2018

        Io l'ho ordinata tramita amazon il 15 ottobre, questa mattina mi è stata consegnata anche se la consegna era prevista tra il 22 e il 25.

        • Jocelin Jia | 10/20/2018

          please send mails to mike.hu@geeetech.cn, thanks

      • Jocelin Jia | 10/20/2018

        A10 EU available soon

  • Steve Jones | 09/27/2018

    Is the 3Dtouch bed leveling sensor a plug-n-go or is there wiring and firmware hacking required?

    • Jocelin Jia | 09/27/2018

      Hello Steve, 1 please check if your extruder has the extension board, if no, this printer does not support 3d touch as old version 2 you need setting the firmware when use the 3 d touch

      • Steve Jones | 09/29/2018

        I haven't bought your A10 yet. So does a new A10 I order from you now have the extension board? And as for the firmware changes that's no problem. I was just wondering if you shipped the A10 with sensor installed and firmware modified.

        • Jocelin Jia | 10/05/2018

          the new one support the 3d touch and already refreshed the firmware

  • ignacio huarte | 08/28/2018

    can you put 3d touch self-leveling?

    • Jocelin Jia | 08/29/2018

      yes, it can

      • Orlando Mauro Petrone | 08/31/2018

        where can we find instructions?

        • Jocelin Jia | 09/03/2018

          Hi can u send me machine serial number? previous version can not support 3d touch, the upgrade one can support it.

  • Medelis3D Medelis3D | 08/27/2018

    Geeetech A10 - Marlin 1.1.9 (with the same settings as Creality Ender 3 - Movement Settings) Download at... http://medelis.se/3D%20models/Medelis%203D/Marlin%201.1.9%20Geeetech%20A10.zip (ZIP file) Enjoy & Happy 3D printing...

    • Jocelin Jia | 08/29/2018

      thanks for your share

  • Medelis3D Medelis3D | 08/15/2018

    Eng. review of the A10 https://youtu.be/wEERjCXalws

  • Albert Low | 08/05/2018

    Hi. Can i upgrade/install the 3-in-1 out hotend multicolor on this A10?

    • Jocelin Jia | 08/06/2018

      the firmware does not support it, if you have talent in develop your own firmware,you can go ahead of it.

  • Michel Knab | 07/13/2018

    german review of the A10 find here:http://blog.knabnet.de/?p=779

    • Bernd Marten | 09/14/2018


      • Jocelin Jia | 09/18/2018

        hello, please level again the heatbed, thanks