How to fix-E180>The screen displayed not correct or black screen

User avatar
Admin
Posts: 214
Joined: Wed Nov 30, 2011 9:49 am

How to fix-E180>The screen displayed not correct or black screen

Post by Admin » Tue Jan 23, 2018 5:33 pm

Hi, guys!

How to fix the screen displayed not correct or black screen-E180?
Well.Here are the files for the LCD:
e180-lcd.rar
(613.54 KiB) Downloaded 425 times



Updates:New UI for E180
E180_UI for v1.32.41.zip
(440.24 KiB) Downloaded 213 times
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
Guide
1.You should open the side protection cover
E180-1.jpg
E180-1.jpg (87.75 KiB) Viewed 4627 times
2.You should take off the sd card
E180-2.jpg
E180-2.jpg (56.33 KiB) Viewed 4627 times
E180-3.png
E180-3.png (193.85 KiB) Viewed 4627 times
3.Format the SD card
4.Copy the un-zip files to root directory of the sd card
E180-4.png
E180-4.png (7.32 KiB) Viewed 4627 times

jhoff
Posts: 1
Joined: Fri Jan 01, 2016 5:31 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by jhoff » Sun Jan 28, 2018 9:40 am

I downloaded the file but cannot unzip it because it requires a password. Please advise. Thank you!

User avatar
William
Site Admin
Posts: 2836
Joined: Tue Jun 07, 2016 9:38 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by William » Tue Jan 30, 2018 9:58 am

I have downloaded, and did not find the need for a password
Life always makes us relaxing!
Try to use the 3d printing improve our life. :roll:

User avatar
_kaktus_
Site Admin
Posts: 676
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: How to fix-E180>The screen displayed not correct or black screen

Post by _kaktus_ » Wed Jan 31, 2018 3:31 am

I wonder why you do not give checksums to files that can be downloaded on the forum.

vital
Posts: 0
Joined: Mon Mar 12, 2018 1:58 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by vital » Mon Mar 12, 2018 2:05 am

Do you have step by step instruction how to open side cover without damage printer?
I need to remove some screws.

michaelconti
Posts: 0
Joined: Wed Mar 14, 2018 3:00 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by michaelconti » Sun Mar 25, 2018 10:40 am

I donwload the file, formatted the SD, copy the file and...result is a wrong screen...not working only white and black line :(

michaelconti
Posts: 0
Joined: Wed Mar 14, 2018 3:00 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by michaelconti » Sun Mar 25, 2018 6:45 pm

I have a problem, i have do everything in the right sequence but after that my disply don't work anymore and the sd too...

User avatar
William
Site Admin
Posts: 2836
Joined: Tue Jun 07, 2016 9:38 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by William » Tue Mar 27, 2018 9:24 am

michaelconti wrote:
Sun Mar 25, 2018 6:45 pm
I have a problem, i have do everything in the right sequence but after that my disply don't work anymore and the sd too...
Could you upload a screenshot of the sd card root directory?
Life always makes us relaxing!
Try to use the 3d printing improve our life. :roll:

michaelconti
Posts: 0
Joined: Wed Mar 14, 2018 3:00 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by michaelconti » Thu Mar 29, 2018 2:17 am

i found was the sd don't working anymore, so i changed it but bow when i print from sd, object with large dimension the printer reset and stop print

User avatar
William
Site Admin
Posts: 2836
Joined: Tue Jun 07, 2016 9:38 am

Re: How to fix-E180>The screen displayed not correct or black screen

Post by William » Thu Mar 29, 2018 6:44 pm

michaelconti wrote:
Thu Mar 29, 2018 2:17 am
i found was the sd don't working anymore, so i changed it but bow when i print from sd, object with large dimension the printer reset and stop print
Could you upload the Gcode of your sd card?
Life always makes us relaxing!
Try to use the 3d printing improve our life. :roll:

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests