i3 Pro A extra fan - PWM or FAN 1?

Post Reply
symowallo
Posts: 1
Joined: Thu Dec 28, 2017 2:56 pm

i3 Pro A extra fan - PWM or FAN 1?

Post by symowallo » Wed Jan 10, 2018 3:06 pm

Hi, in an effort to help with adhesion/curling of my PLA prints, I have printed a bracket for the print bed/nozzle and sourced a 12V 40mm fan, so that I can provide cooling to the bed/nozzle area. My question is, should I hook this up to FAN 1 (printhead fan is already on FAN0) or to the PWM socket? It's a PWM capable fan - ie. it has the 3-pin connector.

Ideally I'd like to be able to switch on/off the fan via Repetier so that when I'm printing ABS, I can have this fan disabled.

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: i3 Pro A extra fan - PWM or FAN 1?

Post by William » Thu Jan 11, 2018 5:36 pm

PWM interface will allow you to control the speed of fan.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests