How to install the driver

Post Reply
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

How to install the driver

Post by zhangxueyou » Wed Apr 15, 2015 1:53 pm

Generally, you don't have to manually install the driver if your board type is Sanguinololu or GT2560, because your computer will automatically install it when it is your first time to connect it to your computer.
As for people whose mainboard type is Ramps1.4+Mega2560 (or R3), you have to Download "Arduino" first.
Download link: ...
After downloading, unzip the file.
Then you can intall the driver for Arduino Mega 2560(R3). The driver is at: arduino-1.0.1-windows\arduino-1.0.1\drivers
you can refer to this page to install the driver: ... he_drivers

Posts: 1
Joined: Mon Apr 29, 2019 11:31 pm

Re: How to install the driver

Post by alaha1125 » Mon Apr 29, 2019 11:39 pm

An error link. Can you update it? Thanks in advance!

Posts: 3
Joined: Thu May 21, 2020 2:42 pm

Re: How to install the driver

Post by ivaanadam » Mon May 25, 2020 7:11 pm

It is really an informative post and it helped me very much in my driver installation. advantages and disadvantages of medical technology You gave detailed step by step instructions about this installation and the link you have shared also good. It is a very useful post too.

Posts: 12
Joined: Mon Jun 29, 2020 3:42 pm

Re: How to install the driver

Post by patsm00re18 » Fri Jul 03, 2020 8:58 am

If we are wanted to know about the installation of this drive then we came to the right place for it.

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests