3D PRINT EXPRESS | 3D printing up to 50% less time

Post Reply
AcadVersion
Posts: 1
Joined: Sun May 14, 2017 8:46 am

3D PRINT EXPRESS | 3D printing up to 50% less time

Post by AcadVersion » Sun May 14, 2017 9:07 am

For all "makers" and interested in 3D printing. Print up to 50% less time with your 3D printer.

https://www.kickstarter.com/projects/76 ... d-printing

*More information about the project in the link.

soniaspring
Posts: 0
Joined: Sat Mar 24, 2018 12:08 am

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time

Post by soniaspring » Sat Mar 24, 2018 12:10 am

Click here --- https://prime-resume.com/blog/job-searc ... cial-media if you need help with writing resume

Jarda3d
Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time

Post by Jarda3d » Tue Apr 02, 2019 4:51 pm

Use Slic3r.org, it have adaptive layers. Great for general and vase printung in accelerated speeds.

BTW, the most of printing time is not printing moves (except vase and simple large pieces), but non-print moves and retractions. I was play with printing speeds up to 160mm/s (with my A10M), but it save time like that with little worse surface finish.

30 mins... 20 min
3h 35m ... 3h 25m

So more speed did not have such effect, if you add about 15-17 mins to preheat for ABS.

If you want to speed-up print a lot, use direct driven extruder, where could be retractions very limited and printing speed could go up freely.
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

Jarda3d
Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time

Post by Jarda3d » Wed Apr 17, 2019 5:03 pm

See my A10M profile. Printing time reduced substantially
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

Xarlina
Posts: 1
Joined: Fri Mar 29, 2019 3:05 am

Re: 3D PRINT EXPRESS | 3D printing up to 50% less time

Post by Xarlina » Fri Apr 19, 2019 6:37 pm

A week ago our colleague brought to our office 5 cool models which he printed on a 3D printer. It`s a very cool machine and if we can do the models faster that`s really exciting)

Post Reply