Firmware modification for I3Pro C

Post Reply
WoletzMi
Posts: 1
Joined: Sat Mar 09, 2019 6:24 pm

Firmware modification for I3Pro C

Post by WoletzMi » Sat Mar 09, 2019 6:37 pm

Hello friends
I am new and therefore I would first like to say a few words to me.
My name is Michael and I am from Germany / Bavaria
I am new to the 3d pressure fever and bought myself an I3 Pro C.

So far, I'm really happy with the printer.

Now I've played the "new" firmware 1.1.8 on my GT2560 Rev A + Board.

However, I would like to work with only one extruder and use the second extruder port as the second z-axis driver.
With a 2nd Z-axis stop switch

What do I have to change everything in the firmware to operate only one extruder?
Countless entries seem to refer to the 2nd extruder.

Thank you for your help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Firmware modification for I3Pro C

Post by William » Fri Apr 26, 2019 5:58 pm

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply