Easy Print 3D

Post Reply
pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Easy Print 3D

Post by pawien » Sat Jan 26, 2019 5:17 pm

Why is not the A20M in the Cofig Easy Print 3D

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Easy Print 3D

Post by _kaktus_ » Sat Jan 26, 2019 10:15 pm

Hello.
:mrgreen:

The answer is obvious.
This printer model is newer than the last release of this program. :lol:

I will notify the GT team of the need for an update. ;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: Easy Print 3D

Post by pawien » Sun Jan 27, 2019 12:19 am

OK Super

Ron82s
Posts: 1
Joined: Fri Jan 25, 2019 10:42 pm

Re: Easy Print 3D

Post by Ron82s » Wed Jan 30, 2019 6:47 pm

Hey
Joins the request
Thanks

dickon
Posts: 1
Joined: Thu Mar 14, 2019 3:23 am

Re: Easy Print 3D

Post by dickon » Thu Mar 14, 2019 3:35 am

Hello,

I recently purchased an A20M.
I first tried the test print DOG file and it looks great.

Then I started to setup the 3D WiFi Module.
Downloaded and Installed EasyPrint 3D App on my iPhone.
Connected the 3D WiFi module to my home LAN wireless network.
3D App shows the printer is online.

but ... when I use the app to try move the printer head as a test, nothing happens.

Please help advise, how to get this working so I can control the printer and print files wirelessly.
I use a MacBook Pro and iPhone.

Thank you.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Easy Print 3D

Post by William » Thu Mar 14, 2019 10:27 am

You should check the baud rate at first.
Try to change the baud rate to the correct value and replug the USB cables.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply