Extruder not working

User avatar
_kaktus_
Site Admin
Posts: 1258
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Extruder not working

Post by _kaktus_ » Mon Oct 29, 2018 1:34 pm

Pusilanime wrote:
Mon Oct 29, 2018 4:50 am
...
When I start printing, there is no problem, it works all right, but after around 10 minutes the extruder starts to make a clicking sound.
It happends every time I try to print and I have to push the filament manually to allow printing to continue.
I´ve checked the board and the extruder has 1.1V
There is also no cloggs on the extruder.

What could be the problem?
You probably have a leveling problem.
Also check that the X axis linear guides are parallel to the heat bed surface.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Pusilanime
Posts: 3
Joined: Fri Dec 22, 2017 12:45 pm

Re: Extruder not working

Post by Pusilanime » Tue Oct 30, 2018 6:04 am

_kaktus_ wrote:
Mon Oct 29, 2018 1:34 pm
Pusilanime wrote:
Mon Oct 29, 2018 4:50 am
...
When I start printing, there is no problem, it works all right, but after around 10 minutes the extruder starts to make a clicking sound.
It happends every time I try to print and I have to push the filament manually to allow printing to continue.
I´ve checked the board and the extruder has 1.1V
There is also no cloggs on the extruder.

What could be the problem?
You probably have a leveling problem.
Also check that the X axis linear guides are parallel to the heat bed surface.
I measured it and it's perfectly aligned..
I tried with a 190-210 °C range (PLA)
Another thing to consider?

User avatar
_kaktus_
Site Admin
Posts: 1258
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Extruder not working

Post by _kaktus_ » Tue Oct 30, 2018 1:16 pm

Hi
:mrgreen:

If your mechanisms are perfectly assembled and all components are perfectly parallel and perpendicular, then two things come to my mind for consideration. :roll:
  1. You can try to increase the spring pressure in the extruder's mechanism.
  2. The nozzle or transport route in the Hot End element can be partially clogged.
You can also use this guide to try to solve the problem yourself.
:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

masternlpngatpro@gmail.com
Posts: 1
Joined: Wed Nov 14, 2018 1:05 am

Re: Extruder not working

Post by masternlpngatpro@gmail.com » Wed Nov 14, 2018 1:11 am

venum wrote:
Fri May 05, 2017 10:49 pm
Bonjour
J'ai un problème , sa fais quelque moi que jais acheter un imprimante 3 d Acrylic Reprap Prusa I3 Pro B mais voilà quand j'ais reçu mon imprimante le moteur de l'extrudeur refusée de tourner donc j'ai contacté le service geeetech qui ma renvoyer une carte mère qui a marcher comme il faut 3 fois et d'un coup en plaine impression un bip sonore retenti donc j'un couper l'imprime , je les rallumer et vérifiée que tout fonctionner mais à nouveau le moteur de l'extrudeur refuse de marcher j'ais tout tentée .donc je pence que la carte mère a encore cramée ?

Que faire je doit acheter une carte mère ?

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder not working

Post by William » Wed Nov 14, 2018 9:32 am

masternlpngatpro@gmail.com wrote:
Wed Nov 14, 2018 1:11 am
venum wrote:
Fri May 05, 2017 10:49 pm
Bonjour
J'ai un problème , sa fais quelque moi que jais acheter un imprimante 3 d Acrylic Reprap Prusa I3 Pro B mais voilà quand j'ais reçu mon imprimante le moteur de l'extrudeur refusée de tourner donc j'ai contacté le service geeetech qui ma renvoyer une carte mère qui a marcher comme il faut 3 fois et d'un coup en plaine impression un bip sonore retenti donc j'un couper l'imprime , je les rallumer et vérifiée que tout fonctionner mais à nouveau le moteur de l'extrudeur refuse de marcher j'ais tout tentée .donc je pence que la carte mère a encore cramée ?

Que faire je doit acheter une carte mère ?
Maybe he can attach the photos then we can get more detail from it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

klotzii
Posts: 2
Joined: Mon Nov 12, 2018 4:48 am

Re: Extruder not working

Post by klotzii » Thu Nov 29, 2018 6:41 pm

Hi!

Is there a step-by-step guide to set the right extruder tension for the A10M extruder? One motor makes very strange noises, changed the cables from E0 to E1 and it doesn´t change anything, still the same noises on the same motor.
What motor-type is it in this special case or do you have a link? (Just in case i want one for spare)

Best regards
klotzii

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder not working

Post by William » Fri Nov 30, 2018 9:34 am

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

klotzii
Posts: 2
Joined: Mon Nov 12, 2018 4:48 am

Re: Extruder not working

Post by klotzii » Tue Dec 04, 2018 10:15 pm

Well, thx for the Link, but on my Stepper is "42SHD0227-24B" engraved on the Backside. But I can´t find this type anywhere...

Also the mechanic of the extruder can´t be found anywhere... :-(

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder not working

Post by William » Wed Dec 19, 2018 10:01 am

You need to contact the sales at first.
They can give you more info of it ;)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Dr_Schmal
Posts: 7
Joined: Sat Jan 26, 2019 9:59 pm
Location: Germany

Re: Extruder not working

Post by Dr_Schmal » Sat Mar 02, 2019 6:16 pm

sadandres wrote:
Wed Jun 29, 2016 12:34 pm
I inspect the voltage, and I find that the A4988 at extruder side measures 0 volt between potentiometer and GND, and 5 volt between VDD and GND. I exchange with any axis to test, and now that axis only moves in one direction. I assume that my A4988 is bad, so… I'm looking for a replacement. I am right?
Thanks to all.
Did you tried to disable cold extrusion checking? ;) (Enter "M302 P1" in EasyPrint -> Control -> G-Code)
Sometimes I had issues that the extruder is not enabled when I press "E-" in EasyPrint :roll:

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests