Unnecessary top cover

Post Reply
Morogorn
Posts: 7
Joined: Wed Nov 14, 2018 6:57 pm

Unnecessary top cover

Post by Morogorn » Wed Nov 14, 2018 7:09 pm

Greetings,

I use SketchUp 8.0, to design a RC wheel, export as .STL and .OBJ.
Import to Repetier Host and Slice with CuraEngine.
After repair the object, the wheel show a top cover.

How remove or not print this unnecessary top cover?

I try mark "Spiralize contour", not work.

Someone can help-me?

Best regards.
Attachments
1.jpg
1.jpg (20.87 KiB) Viewed 4249 times
2.jpg
2.jpg (24.99 KiB) Viewed 4249 times
3.jpg
3.jpg (27.12 KiB) Viewed 4249 times
4.jpg
4.jpg (24.52 KiB) Viewed 4250 times
My printer is: Geeetech prusa I3 A Pro 3D

User avatar
_kaktus_
Site Admin
Posts: 1176
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unnecessary top cover

Post by _kaktus_ » Wed Nov 14, 2018 7:18 pm

Hello.
:mrgreen:

You wrote:
Morogorn wrote:
Wed Nov 14, 2018 7:09 pm
After repair the object, the wheel show a top cover.

What was the reason for this operation :?:
Maybe it introduces a problem.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Morogorn
Posts: 7
Joined: Wed Nov 14, 2018 6:57 pm

Re: Unnecessary top cover

Post by Morogorn » Wed Nov 14, 2018 7:33 pm

Thank for your reply _Kaktus_.

The message showed is:
5.jpg
5.jpg (78.59 KiB) Viewed 4245 times
Than I try slice without repair.

Not work.
My printer is: Geeetech prusa I3 A Pro 3D

User avatar
_kaktus_
Site Admin
Posts: 1176
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unnecessary top cover

Post by _kaktus_ » Wed Nov 14, 2018 7:37 pm

Would you agree to share your model with us before repair?
I will see what can be done.
:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Morogorn
Posts: 7
Joined: Wed Nov 14, 2018 6:57 pm

Re: Unnecessary top cover

Post by Morogorn » Wed Nov 14, 2018 7:43 pm

Ok, it's here.
wheel.zip
(162.54 KiB) Downloaded 81 times
My printer is: Geeetech prusa I3 A Pro 3D

User avatar
_kaktus_
Site Admin
Posts: 1176
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unnecessary top cover

Post by _kaktus_ » Wed Nov 14, 2018 8:09 pm

:mrgreen:
Check it out now.
wheel2.zip
(23.01 KiB) Downloaded 82 times
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Morogorn
Posts: 7
Joined: Wed Nov 14, 2018 6:57 pm

Re: Unnecessary top cover

Post by Morogorn » Wed Nov 14, 2018 8:12 pm

Wow!

Perfect! What it's mistery?
6.JPG
6.JPG (135.71 KiB) Viewed 4236 times
My printer is: Geeetech prusa I3 A Pro 3D

User avatar
_kaktus_
Site Admin
Posts: 1176
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unnecessary top cover

Post by _kaktus_ » Wed Nov 14, 2018 8:14 pm

wheel2-.png
wheel2-.png (533.29 KiB) Viewed 4236 times
The best thing is that I didn't do anything with your model.
I imported in Tinkercad, set the position to the grid, and did the export. :lol:


Sometimes I ignored this message, and printed without repair. :roll:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Morogorn
Posts: 7
Joined: Wed Nov 14, 2018 6:57 pm

Re: Unnecessary top cover

Post by Morogorn » Wed Nov 14, 2018 8:16 pm

Thank you _Kaktus_.

:D
My printer is: Geeetech prusa I3 A Pro 3D

User avatar
_kaktus_
Site Admin
Posts: 1176
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unnecessary top cover

Post by _kaktus_ » Wed Nov 14, 2018 8:17 pm

:mrgreen:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest