Serious problem with 3DTouch Auto Leveling

Post Reply
giannis
Posts: 4
Joined: Mon Nov 21, 2016 7:54 pm

Serious problem with 3DTouch Auto Leveling

Post by giannis » Thu Mar 23, 2017 11:27 pm

The images is not mine but i have exactly the same problem
It is impossible to start a printing with auto level.
During printing the nose in the front side of heatbed is too close to surface and in the back side the gap is very big and the filament do not stuck at the surface
With manual leveling the result is much better.
I have tried 2 marlin versions with the same result
Sorry for my English
https://cloud.githubusercontent.com/ass ... 6f5711.jpg
https://cloud.githubusercontent.com/ass ... d8f8da.jpg
Attachments
Firmwares.rar
(1.71 MiB) Downloaded 417 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Serious problem with 3DTouch Auto Leveling

Post by William » Thu Apr 06, 2017 6:13 pm

Sound werid..have you made your 3Dtouch into normal status ?Please check this viedeo:https://www.youtube.com/watch?v=Ix7lXvf ... e=youtu.be
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

giannis
Posts: 4
Joined: Mon Nov 21, 2016 7:54 pm

Re: Serious problem with 3DTouch Auto Leveling

Post by giannis » Sat Apr 08, 2017 11:58 am

I think the problem begins from the hardware.
I moved the printer to another room and the difference now is from left to right.

Post Reply