hello
i buy a I3 pro B few month ago. and i have some trouble with it.
when i power on the printer, lcd screen display the following message :
nothing happend when i turn button,
if i clic on the button, the Y motor move the hotbed from back to front and never stop.
this appear on screen when Y axe move.
is someone can help me please ?
Trouble with I3 pro B.
-
- Posts: 3
- Joined: Sun Dec 04, 2016 6:04 am
Trouble with I3 pro B.
- Attachments
-
- 15302365_10211305967504275_1356736525_o.jpg (116.7 KiB) Viewed 5826 times
-
- 15311012_10211305967464274_1963327794_o.jpg (150.87 KiB) Viewed 5826 times
-
- Posts: 3
- Joined: Sun Dec 04, 2016 6:04 am
Re: Trouble with I3 pro B.
and an other detail
when i connect the printer to the slicer (repetierhost) i can't move axes with manual mode.
and i haven't neither the extrudor nor the hotend temperature
when i connect the printer to the slicer (repetierhost) i can't move axes with manual mode.
and i haven't neither the extrudor nor the hotend temperature
Re: Trouble with I3 pro B.
Hi,
You can try re-flashing the firmware for you ProB.
Download the firmware:
http://www.geeetech.com/forum/download/file.php?id=2819
Refer it to upload the firmware:
http://www.geeetech.com/forum/viewtopic ... 13&t=17181
You can try re-flashing the firmware for you ProB.
Download the firmware:
http://www.geeetech.com/forum/download/file.php?id=2819
Refer it to upload the firmware:
http://www.geeetech.com/forum/viewtopic ... 13&t=17181
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 3
- Joined: Sun Dec 04, 2016 6:04 am
Re: Trouble with I3 pro B.
many thanks, i do this and keep you informed