Slic3r setting for I3 Pro B

Post Reply
BlastF
Posts: 23
Joined: Wed Aug 31, 2016 4:21 pm

Slic3r setting for I3 Pro B

Post by BlastF » Tue Nov 29, 2016 6:36 pm

Hi guys, i'm testing the new version of slic3r prusa version on my prusa i3 Pro B and i'm having a hard time find the right settings, can you help me?

many thanks :D

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: Slic3r setting for I3 Pro B

Post by William » Tue Dec 06, 2016 2:40 pm

Try the attached config(for nozzle size 0.3 and 0.4mm):
I3 B-PLA-0.4-1.75.zip
(1.35 KiB) Downloaded 4815 times
I3 B-PLA-0.3-1.75.zip
(2.85 KiB) Downloaded 3763 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

TurboJoke
Posts: 2
Joined: Mon Nov 05, 2018 4:57 am

Re: Slic3r setting for I3 Pro B

Post by TurboJoke » Sat Nov 10, 2018 10:28 pm

Hi!

Do you have configurations for ABS and SBS?

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: Slic3r setting for I3 Pro B

Post by William » Tue Nov 13, 2018 9:27 am

TurboJoke wrote:
Sat Nov 10, 2018 10:28 pm
Hi!

Do you have configurations for ABS and SBS?
For ABS:You need to set the first layer to 0.2mm.
Then you need to set the nozzle temp to 230~260C.
For heat bed:90~100C

But I didn't try to use SBS ,I can't give you more suggestion for it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests