Printing problem-who can help me?

Post Reply
n.moschin
Posts: 2
Joined: Fri Apr 22, 2016 4:37 pm

Printing problem-who can help me?

Post by n.moschin » Tue Oct 04, 2016 5:40 pm

Hello everyone, I have a recurring problem on every print...

It seems a periodic disturbance to the mechanics but it's all ok.

I will upload a pic of the problem because it is difficult to describe the ridges that form.

Anyone have the same problem or know how to fix it? :roll:

Thanks
N.M.
Attachments
Schermata 2016-10-03 alle 11.30.04.png
Schermata 2016-10-03 alle 11.30.04.png (112.11 KiB) Viewed 7113 times

ggg666
Posts: 38
Joined: Wed Aug 03, 2016 9:34 am

Re: Printing problem-who can help me?

Post by ggg666 » Wed Oct 05, 2016 10:00 am

n.moschin wrote:Hello everyone, I have a recurring problem on every print...

It seems a periodic disturbance to the mechanics but it's all ok.

I will upload a pic of the problem because it is difficult to describe the ridges that form.

Anyone have the same problem or know how to fix it? :roll:

Thanks
N.M.
Hi,
Looks like there is excessive extrusion or your Z axis has a abnormal movement.
You can refer to this article to make some troubleshooting:
https://www.simplify3d.com/support/prin ... eshooting/

n.moschin
Posts: 2
Joined: Fri Apr 22, 2016 4:37 pm

Re: Printing problem-who can help me?

Post by n.moschin » Wed Oct 12, 2016 11:37 pm

Not solved yet.
I tried to setting mechanics but nothing changed.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Printing problem-who can help me?

Post by William » Sat Oct 15, 2016 4:13 pm

You can decrease the value "extrusion multiplier" and check if your all your Z rods are straight.
And spread some lubricating oil on Z threaded rods.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply