A10M Extruder Losing Heat During Print

Moderator: vert

Post Reply
Posts: 1
Joined: Sat Jan 23, 2021 2:33 am

A10M Extruder Losing Heat During Print

Post by Lindajnr » Sun Jan 24, 2021 11:44 pm

Hi i am new to 3D printing but just got my first printer. I successfully printed a dog which turned out fine, now im trying a second print it starts off ok then after a few seconds it stops extruding the filament and i noticed the heat rapidly going down (I assume this is why it stops printing). The extruder still moves as if it's printing but the filament stops coming out. Any ideas as to what is causing the extruder to rapidly lose heat? I am completely new to this so any help is appreciated.

Thank you.


User avatar
Site Admin
Posts: 6339
Joined: Tue Jun 07, 2016 9:38 am

Re: A10M Extruder Losing Heat During Print

Post by William » Thu Jan 28, 2021 4:42 pm

Hello, it may be that there is a problem with your heating element. You can ask geeetech official for help. They now use the ticket to reply.
The following is the creation process. :D
ticket process.rar
(389.76 KiB) Downloaded 74 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Posts: 8
Joined: Fri Jan 04, 2019 8:46 am

Re: A10M Extruder Losing Heat During Print

Post by Bigthermalboy » Thu Mar 11, 2021 9:29 pm

Hi, I had a similar problem .. i fixed it by re-soldering the whole print head board as i had a number of dry joints.
i also recommend getting some heatsink to feed cabling through to protect them.

Post Reply