Extruder not working when printing

Post Reply
AfjalKhan
Posts: 1
Joined: Sat Apr 11, 2020 6:23 pm

Extruder not working when printing

Post by AfjalKhan » Sat Apr 11, 2020 6:24 pm

Hi, I have built a Geeetech G2C Pro dual extruder from a kit. I have completed all the tests and checks and completed the calibration. I have run all the checks and all seems well with travel and the extruders when in manual mode from the Repatier Host control panel. I have used Slic3r Prusa Edition to produce the code for a test cube. Slic3r gave problems with the first layer Z value.
The printer warms up as expected and starts to print. The movements seem to be correct but no material is extruded. I have tested the extruder both by using the manual buttons and sending G code and the extruder works fine it's only when printing there is a problem.
Any suggestions?

User avatar
William
Site Admin
Posts: 6338
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder not working when printing

Post by William » Mon Apr 13, 2020 10:02 am

Hi,You can check whether the extruder can manually push the consumables out at the heating temperature to confirm whether the nozzle is normal.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply