Hi, Normal room temperature,
The thermistor temperature is around 80kΩ,
Whether the wiring at the hot end is loose?
My printer don't print
Re: My printer don't print
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
No the wiring is good
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
There must be a false contact, on the heating bed, it is at -19 ° C then 17 ° C re -19 ° C then 17 ° C ...
Re: My printer don't print
Hi, are you referring to the temperature change of the hot bed?
Thermistor of the hot bed is at 80kΩ at normal temperature
Can you provide a question video?
Thermistor of the hot bed is at 80kΩ at normal temperature
Can you provide a question video?
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
Between blue and green, the multimeter is on 200k ohm.
The value on the screen is 5.2
The value on the screen is 5.2
- Attachments
-
- IMG_20200330_194714.jpg (247.24 KiB) Viewed 18046 times
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
Today my bed don't heating
Re: My printer don't print
Hi, your hotbed thermistor is broken,
you need change it.
you need change it.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
So, I just saw that it is more complicated than that, when the bed is plugged into the box (power supply, motherboard ...) I have 5.2 but when I unplug the cable, I have 122. The multimeter is still the 200k caliber.
Thanks
Thanks
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
It is break or not ?
Re: My printer don't print
Hi, based on your test data
This is not normal.
This is not normal.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!