Hello,
I have try to print a tower temp with a new filament. But my printer doesn't print.
Attached is a photo of a temperature tower that is not printed.
The nozzle is new and the ptfe change not long ago.
Anyone know where my problem is coming from?
Thanks
My printer don't print
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
My printer don't print
- Attachments
-
- IMG_20200322_195031.jpg (236.45 KiB) Viewed 24313 times
Re: My printer don't print
Hi, level the hotbed before printing,
PLA consumable printing temperature is generally around 210,
The extruder can then be calibrated.
PLA consumable printing temperature is generally around 210,
The extruder can then be calibrated.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
Thanks for your answer
My heating plate is level. How to calibrate my extruder, it's a geeetech a30
My heating plate is level. How to calibrate my extruder, it's a geeetech a30
Re: My printer don't print
Hi, you can refer to this:https://mattshub.com/blog/2017/04/19/ex ... alibration
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
Thank you,
Do I have to do step per mm? In the geeetech a30 there is bondtech or similar extruder?
Do I have to do step per mm? In the geeetech a30 there is bondtech or similar extruder?
Re: My printer don't print
Hi, you can first, level the hot bed.
The distance between the nozzle and the hot bed is the distance of a piece of leveling paper,
then calibrate the extruder.
The distance between the nozzle and the hot bed is the distance of a piece of leveling paper,
then calibrate the extruder.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
I forgot to tell you that I am currently printing with the cold tray.
Because I have an error when I heat my tray :
Error : nozzle 0-temp the heating element is out of order! Please kill the job manually.
Because I have an error when I heat my tray :
Error : nozzle 0-temp the heating element is out of order! Please kill the job manually.
Re: My printer don't print
Hi,you need to check whether the thermistor wiring at the hot end is fully connected or loose,
If not, you need to measure the thermistor,
Make sure that the hot end is normal for normal printing.
If not, you need to measure the thermistor,
Make sure that the hot end is normal for normal printing.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
Where is thermistor?
- Attachments
-
- 15849617759733683405048783837664.jpg (291.54 KiB) Viewed 24297 times
-
- 15849617556847513282924076955917.jpg (224.32 KiB) Viewed 24297 times
-
- Posts: 54
- Joined: Mon Aug 27, 2018 5:08 pm
Re: My printer don't print
I have disassemble my heating plate.
- Attachments
-
- IMG_20200323_130446.jpg (257.86 KiB) Viewed 24297 times