reduce printing speed in easyprint3d

Post Reply
lukorely
Posts: 8
Joined: Tue Jan 21, 2020 1:46 pm

reduce printing speed in easyprint3d

Post by lukorely » Tue Jan 21, 2020 1:50 pm

hello I have the prusa i3 pro b and I have layers shift in the Y axis, according to lei it is because of the print speeds so I would like to reduce the speed and try, Or does anyone know the solution to that problem? thanks

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: reduce printing speed in easyprint3d

Post by William » Tue Jan 21, 2020 2:11 pm

:D Hi, about layer movement,
You can check:
1. The tightness of the belt;
2. Whether the bearings and pulleys are issued with cards and lubricated with lubricants;
3. Whether the drive board voltage is in the normal range: 0.8-1.2V;

You can refer to the print speed adjustment in easyprint:
DLPVK`(Q[LQT9L)}SYEGVG1.png
DLPVK`(Q[LQT9L)}SYEGVG1.png (54.07 KiB) Viewed 4413 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

lukorely
Posts: 8
Joined: Tue Jan 21, 2020 1:46 pm

Re: reduce printing speed in easyprint3d

Post by lukorely » Wed Jan 22, 2020 2:23 am

hello thank you very much I could solve the problem by copying your configuration, but I have another problem, I am printing the xyz cube and in the part of X it cuts a part and it is not a perfect cube
Attachments
bd0ae4c2-4197-45c5-be45-7d231c6c3c17.jpg
bd0ae4c2-4197-45c5-be45-7d231c6c3c17.jpg (168.82 KiB) Viewed 4402 times
59b91dfc-5bb2-43af-b36f-9f85af9ee23b.jpg
59b91dfc-5bb2-43af-b36f-9f85af9ee23b.jpg (90.97 KiB) Viewed 4402 times
22a3004c-27fa-4c4c-974a-07a5fd99b481.jpg
22a3004c-27fa-4c4c-974a-07a5fd99b481.jpg (86.01 KiB) Viewed 4402 times

edvingrozni
Posts: 3
Joined: Tue Dec 31, 2019 1:45 am

Re: reduce printing speed in easyprint3d

Post by edvingrozni » Wed Jan 22, 2020 4:00 am

Hello Lukorely,

What tipe of filament you use?
Did you calibrate feed rate of filament?

lukorely
Posts: 8
Joined: Tue Jan 21, 2020 1:46 pm

Re: reduce printing speed in easyprint3d

Post by lukorely » Wed Jan 22, 2020 7:50 am

I use PLA, I don't understand what you mean by speed, but that issue already solves it (the layer shift)

Post Reply