A20T vs A20M

[mleeber]

Anyone have experience with both the T and the M? In a semi-production environment the M is a huge PITA! The deisgn of the filament path through the hotend is ripe for failure. I am hoping the path in the T is better engineered. Is the T a viable production printer that will successfully deliver multicolor prints?

Thanks!

[3DAngel]

I don’t have the T series.
But in the work to upgrade my M to T.
I have the 3-1. Hot end and it is the same principle as M’s.
But.... it has 3 heating cartridge that it is 6x15mm.
It should heat up quick and evenly.