3dtouch firmware flash

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

3dtouch firmware flash

Post by pawien » Sun Dec 15, 2019 2:46 pm

Hi
I installed the 3d touch firmware on it.
If you start mixer in the printer menu, the printer will restart.

mfg

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3dtouch firmware flash

Post by William » Sun Dec 15, 2019 4:47 pm

Hi,Can you provide specific videos? So that we can solve the problem better.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: 3dtouch firmware flash

Post by pawien » Mon Dec 16, 2019 1:03 am

Video

how can I upload a video here

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3dtouch firmware flash

Post by William » Mon Dec 16, 2019 9:09 am

Hi,you can upload it on YouTube and then send your link here.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: 3dtouch firmware flash

Post by pawien » Mon Dec 16, 2019 8:11 pm


User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3dtouch firmware flash

Post by William » Tue Dec 17, 2019 9:12 am

:D Thanks for you feedback.
Can you use the function of Mixer normally without updating the firmware,
Or you can try flashing the firmware to see if it works without 3d touch.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: 3dtouch firmware flash

Post by pawien » Tue Dec 17, 2019 4:27 pm

Hi
the mixer in the menu works without 3dtouch

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: 3dtouch firmware flash

Post by pawien » Wed Dec 18, 2019 2:26 am

z end stop as part of the probe installation ????

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: 3dtouch firmware flash

Post by pawien » Wed Dec 18, 2019 3:03 am

That means the Z switch belongs away
Attachments
20191217_195813.jpg
20191217_195813.jpg (200.59 KiB) Viewed 7587 times

pawien
Posts: 30
Joined: Thu Dec 27, 2018 2:25 am

Re: 3dtouch firmware flash

Post by pawien » Wed Dec 18, 2019 9:35 pm

No answers

Post Reply