new guy here... I have a a question about t a greetech a10m

Post Reply
oldnc76
Posts: 5
Joined: Mon Aug 19, 2019 4:03 am

new guy here... I have a a question about t a greetech a10m

Post by oldnc76 » Fri Aug 23, 2019 7:55 am

just finished building this today

turned it on no smoke or fire

lcd lights up ok

but I still cant account for this wire
https://imgur.com/a/0l3SM2j

is that for the auto bed leveler I see on Amazon

because everything seems to be connected right but that

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: new guy here... I have a a question about t a greetech a10m

Post by William » Fri Aug 23, 2019 9:46 am

Hi, You can check if the line has a standard for it,
or you can provide its specific connection location and specific picture.
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

oldnc76
Posts: 5
Joined: Mon Aug 19, 2019 4:03 am

Re: new guy here... I have a a question about t a greetech a10m

Post by oldnc76 » Fri Aug 23, 2019 10:06 pm

Could not find a plug for it
thats the crazy thing

I think its for the 3d auto level
have contacted tech support
but still no reply

thanks

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: new guy here... I have a a question about t a greetech a10m

Post by William » Mon Aug 26, 2019 9:07 am

Hi,Is your x-axis limit switch cable plugged into the motherboard?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply