nozzle

Post Reply
CYBER-DB01
Posts: 2
Joined: Thu Aug 08, 2019 9:04 pm

nozzle

Post by CYBER-DB01 » Thu Aug 08, 2019 9:16 pm

i have a blockage in my i3 pro W nozzle, and when i've wateched the youtube video on how to take the nozzle out the hotend was different from the video, so i couldn't take the nozzle off and i haven't been able to use my printer for a while now, please help!
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: nozzle

Post by William » Fri Aug 09, 2019 9:16 am

Hi, you can refer to this: https://www.youtube.com/watch?v=3iS8YU_TNEw
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
CYBER-DB01
Posts: 2
Joined: Thu Aug 08, 2019 9:04 pm

Re: nozzle

Post by CYBER-DB01 » Sat Aug 10, 2019 4:41 am

alrighty thank you ill try it
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: nozzle

Post by William » Mon Aug 12, 2019 9:05 am

:D
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech I3 Pro W”