Hi
I have a problem
Always the USB cable is connected, a reboot is performed at this moment it is not working
Problem usb in the printer
Re: Problem usb in the printer
Hi, You can check if your device manager has a corresponding port.
If not, you can try this through:https://www.geeetech.com/download.html?download_id=40
Download the driver for manual installation.
I hope this can help you.
If not, you can try this through:https://www.geeetech.com/download.html?download_id=40
Download the driver for manual installation.
I hope this can help you.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Problem usb in the printer
El problema es que esta deshabilitado el usb y no muestra en administrador de dispositivos el driver a instalar, al comienzo cuando la conecte a la computadora hechaba chispas al tocar el conector en la salida usb, luego se apaga la impresora A20 cuando intentaba conectarla. En este momento la impresora solo funciona con la tarjeta SD, la compre hace menos de un mes por eBay a un vendedor oficial de geentech.
Un detalle es que la impresora la puse a funcionar electricamente en 120 moviendo el switch que trae la maquina.
Un detalle es que la impresora la puse a funcionar electricamente en 120 moviendo el switch que trae la maquina.
Re: Problem usb in the printer
Hi, Can you provide specific pictures and videos of your question?
You can check your power supply output voltage
and whether your power box is tuned to the safe voltage you need to use.
You can check your power supply output voltage
and whether your power box is tuned to the safe voltage you need to use.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Problem usb in the printer
adjunto imágenes, yo cambie al botón rojo de la fuente antes de encenderla por primera vez a 115 que es la correspondiente a la salida eléctrica que tengo, algo mas tengo que cambiarle en la maquina, podría usted mostrarme?
Cuando trato de instalar el driver no lo instala ya que no reconoce el USB. La impresora trabaja bien solamente mediante la tarjeta SD. Hasta el momento he probado conectar el USB en 4 computadoras diferentes con el mismo resultado.
Cuando trato de instalar el driver no lo instala ya que no reconoce el USB. La impresora trabaja bien solamente mediante la tarjeta SD. Hasta el momento he probado conectar el USB en 4 computadoras diferentes con el mismo resultado.
- Attachments
-
- IMG_20190729_201715.jpg (239.16 KiB) Viewed 17204 times
-
- IMG_20190729_201705.jpg (262.45 KiB) Viewed 17204 times
-
- IMG_20190729_200326.jpg (93.87 KiB) Viewed 17204 times
-
- IMG_20190729_195439.jpg (161.21 KiB) Viewed 17204 times
-
- IMG_20190729_195320.jpg (314.93 KiB) Viewed 17204 times
Re: Problem usb in the printer
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Problem usb in the printer
Hi, You need to download the driver according to your needs.
You can refer to this for specific operations:https://www.geeetech.com/forum/viewtopi ... RlcFtWdCG4
Also, you can try to replace the USB cable to connect to the printer to view.
You can refer to this for specific operations:https://www.geeetech.com/forum/viewtopi ... RlcFtWdCG4
Also, you can try to replace the USB cable to connect to the printer to view.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Problem usb in the printer
Weak mains grounding or bad cable or driver.
Easiest way to reliable install serial drivers for GT printers is to install Arduino IDE.
Easiest way to reliable install serial drivers for GT printers is to install Arduino IDE.
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.