Chimera Dual Hotends

Post Reply
Dave69
Posts: 7
Joined: Fri Jul 12, 2019 6:46 am

Chimera Dual Hotends

Post by Dave69 » Tue Jul 16, 2019 5:37 pm

Hi guys need some help.

Got it all set up and some what printing. My problem is this I start the print it lays the first layer then re homes but its trying to go past the endstop with grinding, once it feels it has done what it needs, it goes back on to the printing board quite away from initial layer and starts the print. I have attached a picture so you can see what I mean.

I have been all through Marlin changing and re changing to no avail, inverting does not help just makes the issue even worse.


The only thing I can think of now is something maybe in the G.code.


Is there anyone here that may have or had the same problem and knows what I need to do to correct said issues.


TIA
Attachments
66748544_555943784940189_5383777463002202112_n.jpg
66748544_555943784940189_5383777463002202112_n.jpg (362.02 KiB) Viewed 3495 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Chimera Dual Hotends

Post by William » Tue Jul 16, 2019 6:05 pm

Hi, from your print model is seems the print layer shift,
you can try 1. Check the belt tightness;
2. Whether the bearing and pulley are issued (lubrication can be lubricated);
3. Reduce printing speed;
4. Adjust the drive board
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Dave69
Posts: 7
Joined: Fri Jul 12, 2019 6:46 am

Re: Chimera Dual Hotends

Post by Dave69 » Tue Jul 16, 2019 6:37 pm

Thanks for quick reply.

I have checked all except No 4.

Could you elaborate on how to check drive board please so I don't mess up

Cheers

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Chimera Dual Hotends

Post by William » Wed Jul 17, 2019 9:08 am

Hi, you can refer to this: turn the voltage clockwise and decrease the voltage counterclockwise.
步进驱动版.png
步进驱动版.png (132.58 KiB) Viewed 3453 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply