BLTouch self-test before every probe??

Post Reply
pndavkota
Posts: 4
Joined: Fri Jan 14, 2022 10:51 pm

BLTouch self-test before every probe??

Post by pndavkota » Thu Jan 27, 2022 2:11 pm

I recently installed a BLTouch on my A10 and before every probe operation it does a quick self-test. It moves the pin up and down twice each time it goes to touch the bed 10.0.0.0.1 192.168.1.254. This causes the bed leveling operation to crash the hot end into the bed on the second leveling operation.

Post Reply