HELP
I have now brought two new hot ends for my GEEETECH A10M. One is made buy Giantarm (on right) and now Geetech (on left). But both power leads are 35mm shorter then original wires.
Has anybody had experience in wiring these back in, I have attached the connection block but it will not reach the connection hole.
A10M Hot End Replacement
-
VectisDragon
- Posts: 1
- Joined: Thu Jun 24, 2021 2:06 am
A10M Hot End Replacement
- Attachments
-
- 20210713_121934.jpg (289.96 KiB) Viewed 1562 times
Re: A10M Hot End Replacement
Hello, whether the heating line on your old hotend is okay, you can connect it to the new hotend.