Geeetech A10 first time problems

Post Reply
KamsanYoun
Posts: 4
Joined: Thu Jul 08, 2021 2:13 am

Geeetech A10 first time problems

Post by KamsanYoun » Thu Jul 08, 2021 2:19 am

I'm new to 3D printing. I got a Geeetech A10 and set it up, hopefully correctly. Each time I print the test print (supposedly a dog), the print head scrapes off the first layer as it moves around. I've done the paper test, and I thought it was correct but maybe not. Any ideas how to fix this?

Post Reply