What version do I have?

Post Reply
MacLaddy
Posts: 3
Joined: Fri Jun 11, 2021 2:21 pm

What version do I have?

Post by MacLaddy » Fri Jun 11, 2021 2:30 pm

Hey folks,

I purchased an A10M last week from Amazon. I thought I was getting the newest and best, but now I'm thinking otherwise. It was shipped with a European power cord (I'm in the U.S), and it had a Cat as a test print instead of the lizard. It was also a mess in the box. Pieces were falling apart and I had to tune everything. It's printing really great, but it took some time to get there.

Some things I've noticed. There is no hollow area under the heat bed, so I'm guessing it has the newer motherboard. But it only has a micro-usb, and I thought the newer versions had the full size USB.

What's going on here? Did I get a counterfeit product?
Version.jpg
Version.jpg (95.33 KiB) Viewed 2367 times

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: What version do I have?

Post by Admin » Fri Jun 11, 2021 6:23 pm

Hello, you can view the printer information by viewing the on-screen menu. If it is a GT2560V4.1 motherboard, it is the latest printer.

MacLaddy
Posts: 3
Joined: Fri Jun 11, 2021 2:21 pm

Re: What version do I have?

Post by MacLaddy » Sat Jun 12, 2021 8:17 am

Admin wrote:
Fri Jun 11, 2021 6:23 pm
Hello, you can view the printer information by viewing the on-screen menu. If it is a GT2560V4.1 motherboard, it is the latest printer.
Interesting. Yes, it says it is GT2560 V4.1 - FW Ver: V2.2 - HW Ver: V1.01

Shouldn't I have a full size SD Card on this model? Am I just not seeing it?

Post Reply