Hi there,
I am new to Geeetech printers. Up to now, I only used my Ender 3 (and SparkMaker). I love using Klipper on my Ender 3 and want to use it now with my new A10T. But... pins for the extruders? Sensor type? Sensor pin? Anyone experience with that?
Klipper on A10T
Moderator: vert
-
AndreasThaler
- Posts: 7
- Joined: Wed Nov 13, 2019 7:49 am
Re: Klipper on A10T
Ok,
I see the .cfg for the A10M with:
step_pin: ar46
dir_pin: ar44
enable_pin: !ar12
for extruder 0
step_pin: ar49
dir_pin: ar47
enable_pin: !ar48
for extruder 1
BUT
I can´t find any documentation about the pins for extruder 2.
Help please!
I see the .cfg for the A10M with:
step_pin: ar46
dir_pin: ar44
enable_pin: !ar12
for extruder 0
step_pin: ar49
dir_pin: ar47
enable_pin: !ar48
for extruder 1
BUT
I can´t find any documentation about the pins for extruder 2.
Help please!
-
AndreasThaler
- Posts: 7
- Joined: Wed Nov 13, 2019 7:49 am
Re: Klipper on A10T
step 43
Dir 45
EN 41
A guy in the Geeetech 3D Printer User Club just answered.
Bruce Greenleaf
Dir 45
EN 41
A guy in the Geeetech 3D Printer User Club just answered.
Bruce Greenleaf
-
AndreasThaler
- Posts: 7
- Joined: Wed Nov 13, 2019 7:49 am
Re: Klipper on A10T
He measured and installed Marlin 2.0.
-
AndreasThaler
- Posts: 7
- Joined: Wed Nov 13, 2019 7:49 am
Re: Klipper on A10T
I am afraid, there is no working bootloader on my A10T 
-
AndreasThaler
- Posts: 7
- Joined: Wed Nov 13, 2019 7:49 am
Re: Klipper on A10T
There IS a working bootloader on the A10T. You have to press the "reset"-button while flashing! Crazy!
But now, I installed Klipper. The pins for E2 ARE right!
But now, I installed Klipper. The pins for E2 ARE right!
-
AndreasThaler
- Posts: 7
- Joined: Wed Nov 13, 2019 7:49 am
Re: Klipper on A10T
Here the working printer.cfg