SKR V1.3 on the A10 - Any pointers?

Matsubaa
Posts: 29
Joined: Sat Nov 03, 2018 1:34 am

Re: SKR V1.3 on the A10 - Any pointers?

Post by Matsubaa » Wed Mar 25, 2020 12:54 am

It was overkill for just the printer but this is the exact kit I bought: https://www.amazon.com/gp/product/B01MC ... UTF8&psc=1

axiom
Posts: 8
Joined: Wed Sep 05, 2018 10:33 pm

Re: SKR V1.3 on the A10 - Any pointers?

Post by axiom » Wed Mar 25, 2020 9:35 pm

Matsubaa wrote:
Wed Mar 25, 2020 12:54 am
It was overkill for just the printer but this is the exact kit I bought: https://www.amazon.com/gp/product/B01MC ... UTF8&psc=1
Nice! Thank you!

t2u
Posts: 4
Joined: Sat Apr 25, 2020 5:57 am

Re: SKR V1.3 on the A10 - Any pointers?

Post by t2u » Sat Apr 25, 2020 6:09 am

Hello everybody,
I would like to know if it would be possible to have photos, a diagram, or a detailed explanation of the new connection because I am a little lost with the wiring of the hotend part (extension card).
Thank you in advance for your help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: SKR V1.3 on the A10 - Any pointers?

Post by William » Sat Apr 25, 2020 11:42 am

Hi,do you mean this?
转接板介绍.png
转接板介绍.png (305.75 KiB) Viewed 21602 times
转接板的3d touch接法.JPG
转接板的3d touch接法.JPG (130.74 KiB) Viewed 21602 times
3d touch 接法.png
3d touch 接法.png (398.84 KiB) Viewed 21602 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

t2u
Posts: 4
Joined: Sat Apr 25, 2020 5:57 am

Re: SKR V1.3 on the A10 - Any pointers?

Post by t2u » Sat Apr 25, 2020 9:48 pm

yes the extension card in photo.
I would like to know how to connect the extension card to the skr1.3
Last edited by t2u on Sat Apr 25, 2020 9:53 pm, edited 2 times in total.

t2u
Posts: 4
Joined: Sat Apr 25, 2020 5:57 am

Re: SKR V1.3 on the A10 - Any pointers?

Post by t2u » Sat Apr 25, 2020 9:51 pm

yes the extension card in photo

t2u
Posts: 4
Joined: Sat Apr 25, 2020 5:57 am

Re: SKR V1.3 on the A10 - Any pointers?

Post by t2u » Sun Apr 26, 2020 5:09 am

Matsubaa wrote:
Mon Nov 25, 2019 9:55 pm
Using the below images, I cut the connector off the control-board end of the hotend bundle.

I'm don't have the 3d touch connected yet but I've confirmed I've got motion control, heating and fans.

I've crimped on JST connectors for leads that needed them.
Pin -> Board Connection
6 -> I
7 -> H
8 -> D
9 -> H
10 -> D
11 -> C
12 -> C


it is this part that I do not understand very well, that is why I would have liked more detail on the wiring

andresdrb
Posts: 4
Joined: Mon Dec 17, 2018 9:39 pm

Re: SKR V1.3 on the A10 - Any pointers?

Post by andresdrb » Fri May 15, 2020 5:52 pm

HI There,

I´m going to do the same mod to my printer (to my A20 actually, but should be the same). COuld someone let me know which jumpers you left where? On this video (https://www.youtube.com/watch?v=GNGN2iSQ5j4&t=866s) they mention to initially remove all jumpers for the drivers and go from there (I know my way around with that) but mentions also other jumpers but I´m not clear which I should leave where. Can you help? I donñt want to burn the board or do something wrong. ANy closeup pictures of the biard wuld help to see which jumper is where.

Cheers

derekpittx
Posts: 4
Joined: Mon Feb 10, 2020 2:15 pm

Re: SKR V1.3 on the A10 - Any pointers?

Post by derekpittx » Thu May 28, 2020 8:16 pm

I have an SKR 1.3 on the way, arriving Monday since it was actually cheaper to upgrade than to replace. I'll probably step up to the TMC2130's at some later date but for now it's just a straight-up replacement of the GT2560 v3 I'm after.

Trust35
Posts: 14
Joined: Thu May 14, 2020 8:45 pm

Re: SKR V1.3 on the A10 - Any pointers?

Post by Trust35 » Tue Jun 30, 2020 6:35 pm

Hi! I have installed SKR 1.4. all is ok but i dont't know how connect th eextruder motor In motor is 4 cables black,red,green and blue. How is conneced on SKR? THANK you very much!!

Post Reply