A10m Pausing at Purge tower.

Moderator: vert

parker1ray
Posts: 15
Joined: Thu Jun 06, 2019 10:51 pm

Re: A10m Pausing at Purge tower.

Post by parker1ray » Tue Jul 23, 2019 1:44 am

I just wanted to post a few picks of this beast now that I have tamed her. They were all printed on the Geeetech A10M.
Attachments
Notre Dame.jpg
Notre Dame.jpg (353.46 KiB) Viewed 2274 times
Geeetech A10M Makes.jpg
Geeetech A10M Makes.jpg (396.48 KiB) Viewed 2274 times

PrebenGH
Posts: 14
Joined: Fri Jul 12, 2019 9:43 pm

Re: A10m Pausing at Purge tower.

Post by PrebenGH » Tue Jul 23, 2019 3:59 am

I have included a photo of the OmNom with the prime tower.
The prime tower has a white ring between the two green ring all the way down to the first layer, but the OmNom is green for the first many layers. So I don’t quite get why the tower isn’t all green for the bottom layers.
By the way I think that after I got the bed leveled correctly and a more solod prime tower that gives me a more distinct shift between colors, the A10M is a very solid printer.

PrebenGH
Posts: 14
Joined: Fri Jul 12, 2019 9:43 pm

Re: A10m Pausing at Purge tower.

Post by PrebenGH » Tue Jul 23, 2019 4:02 am

IMG_0153.jpeg
IMG_0153.jpeg (266.54 KiB) Viewed 2274 times

PrebenGH
Posts: 14
Joined: Fri Jul 12, 2019 9:43 pm

Re: A10m Pausing at Purge tower.

Post by PrebenGH » Tue Jul 23, 2019 4:05 am

Sorry, the photos didn't load on my iPad.
Attachments
IMG_0154.jpeg
IMG_0154.jpeg (211.69 KiB) Viewed 2274 times

Geeeko
Posts: 26
Joined: Sun Feb 03, 2019 12:20 am

Re: A10m Pausing at Purge tower.

Post by Geeeko » Wed Jul 24, 2019 10:49 am

Thanks for the max Z speed trick. I was also in a similar boat since months, wondering what could cause that pause. I would never had think about this !
I made a quick try and it seems to solve it !!
Next step is to find how to make working gcode m211 (disable soft stop) to allow using a purge bucket instead of using a prime tower.
I tried this : https://www.thingiverse.com/thing:3362680
But M211 does not seem to work...

Post Reply