Page 1 of 1
Gifted a Geeetech A10 but impossible to find documentation or support online.
Posted: Mon Jul 15, 2019 6:59 pm
by Lincon12
Hello everyone,,
I gave an A10 to my brother this Christmas, but we couldn’t get the printer to print the first test model (some problem with MINTEMP for bed and extruder).
We’ve googled quite a lot, but the Geeetech website seems to be down.
Do you know if it’s been like this for a while and if yes, where can we find alternative help? Only on Facebook?
Thanks.
Re: Gifted a Geeetech A10 but impossible to find documentation or support online.
Posted: Mon Jul 15, 2019 7:55 pm
by William
Re: Gifted a Geeetech A10 but impossible to find documentation or support online.
Posted: Tue Jul 16, 2019 10:04 am
by Admin
Lincon12 wrote: ↑Mon Jul 15, 2019 6:59 pm
Hello everyone,,
I gave an A10 to my brother this Christmas, but we couldn’t get the printer to print the first test model (some problem with MINTEMP for bed and extruder).
We’ve googled quite a lot, but the Geeetech website seems to be down.
Do you know if it’s been like this for a while and if yes, where can we find alternative help? Only on Facebook?
Thanks.
hi，This is usually a short circuit of the hot bed thermistor. You can use a multimeter to check the thermistor of the hot bed. The normal range at room temperature is 80-90kΩ.
Reader
Posted: Wed Nov 11, 2020 6:45 pm
by Rudyrmstrong
Gifted a geeetech A10 but impossible to find documentation or support online. Help
AskPetersen is not easy, But as I told you I make it possible to help everyone at the time when he or she is true. When the whole for the thing is be calculated then this whole will be perfect for me.