Klipper firmware

Matsubaa
Posts: 29
Joined: Sat Nov 03, 2018 1:34 am

Re: Klipper firmware

Post by Matsubaa » Thu Aug 29, 2019 11:00 am

I have some hardware issues to work through but I wanted to pipe up and say that I'm using the config from the first post here but had to invert every stepper direction including the extruder.

I don't know if this is just my machine being idiosyncratic or if it's the A10 generally but that was confusing.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Klipper firmware

Post by William » Thu Aug 29, 2019 11:04 am

Hi, What driver board do you use?
Can you provide more details about your question?
So that we can solve it better. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

3DAngel
Posts: 77
Joined: Tue Aug 06, 2019 2:04 pm

Re: Klipper firmware

Post by 3DAngel » Sun Sep 08, 2019 3:32 pm

I might have issue with my eye lately.... but I could not find your config anywhere...
would you be able to post it, it would help me and others.... thanks

killvearn
Posts: 12
Joined: Mon Apr 03, 2017 9:12 am

Re: Klipper firmware

Post by killvearn » Mon Sep 16, 2019 7:23 am

3DAngel wrote:
Sun Sep 08, 2019 3:32 pm
I might have issue with my eye lately.... but I could not find your config anywhere...
would you be able to post it, it would help me and others.... thanks
It's on the first post.

3DAngel
Posts: 77
Joined: Tue Aug 06, 2019 2:04 pm

Re: Klipper firmware

Post by 3DAngel » Tue Sep 17, 2019 10:32 am

yes, I did find that after.. lol

getting old.
Thanks for taking the time to share!

psxsnake
Posts: 9
Joined: Thu Oct 17, 2019 7:29 pm

Re: Klipper firmware

Post by psxsnake » Thu Oct 31, 2019 10:16 pm

Massimiliano wrote:
Wed May 08, 2019 6:44 am
petous22 wrote:
Wed Jan 30, 2019 2:21 am
Thank You very much for opening my eyes. I'm modify your printer.cfg file for my A10M with BlTouch copy. Klipper is far better firmware than Marlin. My settings is in attachments for Cura and for Klipper. printerA10M.zip
Sorry for my English.
Hi.
Very useful your conf. I've used it as a base for my A20M.
Question: My LCD does not work. Of course, I'd say, since is different.
I do not find the type of LCD of the A20M, where did you find yours?
how you set bed size?
can i see your printer.cfg for A20M?
thanks

3DAngel
Posts: 77
Joined: Tue Aug 06, 2019 2:04 pm

Re: Klipper firmware

Post by 3DAngel » Sun Nov 03, 2019 2:05 am

[stepper_y]
step_pin: ar31
dir_pin: ar33
enable_pin: !ar29
step_distance: .0125
endstop_pin: ^ar26
position_endstop: 0
position_max: 200 <================ on the Stepper X and Y and Z you set up the Max position. in A20M this would be 250
homing_speed: 30

hope this help

psxsnake
Posts: 9
Joined: Thu Oct 17, 2019 7:29 pm

Re: Klipper firmware

Post by psxsnake » Mon Nov 04, 2019 3:20 pm

3DAngel wrote:
Sun Nov 03, 2019 2:05 am
[stepper_y]
position_max: 200 <================ on the Stepper X and Y and Z you set up the Max position. in A20M this would be 250
why 5 less if bed is 255?

3DAngel
Posts: 77
Joined: Tue Aug 06, 2019 2:04 pm

Re: Klipper firmware

Post by 3DAngel » Tue Nov 05, 2019 1:40 pm

to be on the safe side....
I have the supre plate glass and it uses clip to hold down the glass, so the effective print area is much smaller than 250

psxsnake
Posts: 9
Joined: Thu Oct 17, 2019 7:29 pm

Re: Klipper firmware

Post by psxsnake » Wed Nov 06, 2019 4:05 pm

3DAngel wrote:
Tue Nov 05, 2019 1:40 pm
to be on the safe side....
I have the supre plate glass and it uses clip to hold down the glass, so the effective print area is much smaller than 250
you are right thanks

Post Reply