My A10 does not work well

Moderator: vert

Post Reply
Mathias_N
Posts: 9
Joined: Wed Nov 21, 2018 10:42 pm

My A10 does not work well

Post by Mathias_N » Wed Apr 14, 2021 5:42 pm

Hello,

After smoking the motherboard, I have no idea why, I swapped the motherboard and driver. Now I have even more problems

Now my A10 only travels halfway. no matter if X, Y or Z if I move it manually or level, it only moves halfway. I only had the 1.8 on it, now Merlin 2.0. Nothing has changed. The stepper motors keep cracking, nothing fits. :twisted: :twisted: :twisted:
In addition, when I connect the 3D daughter, the motor starts smoking on the X-axis. :?: :twisted:

The board is the GT 2560 V3.0 Protocol 1.0

Auto Bed Leveling (3D-Toch) is also installed

Can someone tell me what to do?

I also read something that the drivers should be set to 1.0V, how does that work. :?: :?: :?: :?: :?:

Thanks in advance



greeting



Mathias

Mathias_N
Posts: 9
Joined: Wed Nov 21, 2018 10:42 pm

Re: My A10 does not work well

Post by Mathias_N » Mon Apr 19, 2021 3:42 am

Hello,

nobody who can help?

Best regards

Mathias

User avatar
Admin
Posts: 353
Joined: Wed Nov 30, 2011 9:49 am

Re: My A10 does not work well

Post by Admin » Wed Apr 21, 2021 10:03 am

Hello, according to your description, there is a high probability that the firmware is a problem. It is recommended that you reinstall the firmware:
https://www.geeetech.com/download.html?download_id=30
A10_G04 (GT2560V3 + CH340)

Mathias_N
Posts: 9
Joined: Wed Nov 21, 2018 10:42 pm

Re: My A10 does not work well

Post by Mathias_N » Wed Apr 21, 2021 6:26 pm

Hello.

thanks for answering.

I've done that in the meantime. The stepper motors for X and Y rattle, the whole printer vibrates.

Best regards

Mathias

Post Reply