new version of the firmware - autumn 2018

patm300e
Posts: 14
Joined: Mon Aug 27, 2018 8:06 pm

Re: new version of the firmware - autumn 2018

Post by patm300e » Tue Sep 25, 2018 9:02 pm

OK, sorry I am impatient! :lol: I will wait. The old firmware seems to be working fine for me.

asterx
Posts: 5
Joined: Sat Dec 15, 2018 9:30 pm

Re: new version of the firmware - autumn 2018

Post by asterx » Thu Dec 27, 2018 8:13 pm

Is there a way to check the actual firmware version of the Wifi box?

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: new version of the firmware - autumn 2018

Post by _kaktus_ » Thu Dec 27, 2018 10:13 pm

Hello.
:mrgreen:

Generally, the user can verify this by the serial number. ;)
This device did not have so many changes in the firmware.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

NailByter
Posts: 1
Joined: Mon Mar 20, 2017 7:38 am

Re: new version of the firmware - autumn 2018

Post by NailByter » Sat Mar 30, 2019 1:52 pm

Hi

It was indicated that there may be a process to upgrade the firmware on the older models of the 3DWiFi box.

How is this progressing?

Regards

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: new version of the firmware - autumn 2018

Post by _kaktus_ » Sat Mar 30, 2019 2:53 pm

NailByter wrote:
Sat Mar 30, 2019 1:52 pm
...
How is this progressing?
...
:mrgreen:
Positively.
Yes, it is.
Just read the forum.
:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

ellaevelyn818
Posts: 1
Joined: Fri Dec 24, 2021 11:58 pm

Re: new version of the firmware - autumn 2018

Post by ellaevelyn818 » Sat Dec 25, 2021 12:05 am

At the moment, as I mentioned earlier, the whole operation is a bit troublesome.

Together with the lead engineer we have to gather conclusions and consult.
There is one more idea to test for simplifying the procedure.

The device is built on "a sandwich" and each µC requires an update of its software. Hence the cumbersome procedure.
I can also say that in the new version of the software the firmware

update procedure has been very well developed and is user friendly.

Post Reply