Marlin Firmware

Post Reply
Benfish65
Posts: 4
Joined: Wed Jul 18, 2018 8:02 am

Marlin Firmware

Post by Benfish65 » Sun Mar 29, 2020 9:26 am

Hello everyone.

I am looking for some help.

I would like to add auto bed leveling to my MeCreator 2.

First, what would be the easiest way to do this?
Second, I have a BLTouch that I would like to use with the latest Marlin. Is this possible?
Third, I don’t know what needs to be changed in Marlin and I don't know how to flash firmware onto my printer. If someone could be so kind to help me, I would be willing to compensate for your time.

Thanks to all who can help!

Noradavis
Posts: 2
Joined: Mon Dec 27, 2021 8:48 pm
Location: usa
Contact:

Re: Marlin Firmware

Post by Noradavis » Thu Feb 10, 2022 8:03 pm

Marlin is open source firmware primarily designed for RepRap project based FDM 3D-printers using the Arduino platform
Marlin Firmware runs on the 3D printer's spacebar counter main board, managing all the real-time activities of the machine. It coordinates the heaters, steppers, sensors, lights, LCD display, buttons, and everything else involved in the 3D printing process.

Post Reply