Page 1 of 1

Error MAXTEMP BED

Posted: Thu Jan 16, 2020 5:00 am
by bermo96
Hello everyone,

I do have a problem with my MeCreator 2, the error MAXTEMP BED is showing on the LCD screen. I already have disconnected the heatedbed sensor but the error is still there. The temp of the bed is 164°C and never go down. I did also reflashed the firmaware but the error is still showing.

Can someone help me ?

Re: Error MAXTEMP BED

Posted: Thu Jan 16, 2020 9:37 am
by William
:D Hi, If you unplug the hot-bed wire from the motherboard,
If the temperature still shows high temperature,
May be a problem with the motherboard.

Re: Error MAXTEMP BED

Posted: Thu Jan 16, 2020 11:24 pm
by bermo96
Ok thanks for the reply. It does mean that my motherboard is bad then.