Error MAXTEMP BED

Post Reply
bermo96
Posts: 2
Joined: Thu Jan 16, 2020 4:55 am

Error MAXTEMP BED

Post by bermo96 » Thu Jan 16, 2020 5:00 am

Hello everyone,

I do have a problem with my MeCreator 2, the error MAXTEMP BED is showing on the LCD screen. I already have disconnected the heatedbed sensor but the error is still there. The temp of the bed is 164°C and never go down. I did also reflashed the firmaware but the error is still showing.

Can someone help me ?

User avatar
William
Site Admin
Posts: 6174
Joined: Tue Jun 07, 2016 9:38 am

Re: Error MAXTEMP BED

Post by William » Thu Jan 16, 2020 9:37 am

:D Hi, If you unplug the hot-bed wire from the motherboard,
If the temperature still shows high temperature,
May be a problem with the motherboard.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

bermo96
Posts: 2
Joined: Thu Jan 16, 2020 4:55 am

Re: Error MAXTEMP BED

Post by bermo96 » Thu Jan 16, 2020 11:24 pm

Ok thanks for the reply. It does mean that my motherboard is bad then.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest