Me Creator 2 aluminium plate

Post Reply
8ung
Posts: 21
Joined: Thu Feb 23, 2017 2:08 am

Me Creator 2 aluminium plate

Post by 8ung » Tue Jan 14, 2020 3:08 pm

Hi GEETECH guys
any explanation, why your spare part https://www.geeetech.com/mini-aluminum- ... p-878.html
is shrunken.
My original plate has 180x180mm
IMG_20200114_060356.jpg
IMG_20200114_060356.jpg (173.67 KiB) Viewed 11525 times
IMG_20200114_060326.jpg
IMG_20200114_060326.jpg (183.47 KiB) Viewed 11525 times
thats neccessary because printing volume is 160x160mm
pse for Info
tnx
Last edited by 8ung on Tue Jan 14, 2020 5:59 pm, edited 1 time in total.

User avatar
William
Site Admin
Posts: 6331
Joined: Tue Jun 07, 2016 9:38 am

Re: Me Creator 2 aluminium plate

Post by William » Tue Jan 14, 2020 4:31 pm

:D Hi,thanks for your feedback.
maybe changed size but not adjusted,
you can print in the range of the hotbed.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

8ung
Posts: 21
Joined: Thu Feb 23, 2017 2:08 am

Re: Me Creator 2 aluminium plate

Post by 8ung » Tue Jan 14, 2020 5:50 pm

Ah I see there was a Mecreator , without "2", never seen this before :-)
Ok this plate should be for the old modell
But where is the plate for Mecreator 2
Do you have a link William
tnx

8ung
Posts: 21
Joined: Thu Feb 23, 2017 2:08 am

Re: Me Creator 2 aluminium plate

Post by 8ung » Wed Aug 05, 2020 2:57 am

any hints William ?

Post Reply