3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm

Post Reply
Avi128
Posts: 1
Joined: Sat Feb 13, 2021 6:22 am

3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm

Post by Avi128 » Sat Feb 13, 2021 6:27 am

After measuring with a caliper, My Z axis seems to move 10 times farther than specified, no matter what slicer I use. I tried reflashing the Marlin firmware and shifting the potentiometer on the z-axis motor driver but I still can't seem to fix this. I haven't been able to get anything properly printed!

Any help would be appreciated. :)

dang
Posts: 3
Joined: Sun Mar 07, 2021 1:15 am

Re: 3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm

Post by dang » Fri Mar 19, 2021 8:33 am

Hi,

I have the same issue... 6mm Z travel instead of 1 mm !!!!

Please help

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: 3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm

Post by Admin » Fri Mar 19, 2021 11:51 am

Hello, please check the step value of the z-axis, it may be too large and can be adjusted.

Post Reply