having problems with the "new Mk8 extruder"

jaimette_6 · Post by **jaimette_6** » Fri Apr 17, 2020 2:24 am

Hi there,

I´ve been reading you for a long time (thanks for that), but I have never writte before!

I bougth the new MK8 extruder (from the Geeetech web site) and i´m having a problem. When i try to introduce the PLA filament, it stucks somewhere and I can´t continue until the nozzle (previusly I warm up the nozzle till 260 degres).

when the filament stop going down I tried to move the extruder but nothing hapends and it sound like if it is stucked

Thanks for your help!

PD: SOrry for my english!

Post by **William** » Fri Apr 17, 2020 11:46 am

Hi,you can refer to this:viewtopic.php?f=13&t=17097.
Hope can help you .

jaimette_6 · Post by **jaimette_6** » Fri Apr 17, 2020 4:10 pm

Yes! it was really hepfull!

Post by **William** » Fri Apr 17, 2020 5:02 pm

Geeetech

having problems with the "new Mk8 extruder"

having problems with the "new Mk8 extruder"

Re: having problems with the "new Mk8 extruder"

Re: having problems with the "new Mk8 extruder"

Re: having problems with the "new Mk8 extruder"