Z Axis offset issue

Post Reply
Katsuki
Posts: 13
Joined: Sun Sep 01, 2019 6:20 am

Z Axis offset issue

Post by Katsuki » Mon Sep 16, 2019 1:10 am

My printer wont save the Z axis offset when calibrating the 3d touch

Image

I have eeprom enables in my config

Image

Katsuki
Posts: 13
Joined: Sun Sep 01, 2019 6:20 am

Re: Z Axis offset issue

Post by Katsuki » Mon Sep 16, 2019 2:10 am

I've fixed this but completely disabled EEPROM settings and just having a fixed offset in the program, I'll have to change it each time I pull the extruder apart but I guess I would have to the other way also.

There is a note on the guide thread saying to try disabling the EEPROM, this should be made more noticeable, as I skipped it many a times before spotting it to give it a go.

User avatar
William
Site Admin
Posts: 4336
Joined: Tue Jun 07, 2016 9:38 am

Re: Z Axis offset issue

Post by William » Mon Sep 16, 2019 9:27 am

Hi, you can use M500 to save.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests