Upgrade I3 Pro W to dual Extruder

Post Reply
Lanoxx
Posts: 1
Joined: Mon Mar 25, 2019 11:59 pm

Upgrade I3 Pro W to dual Extruder

Post by Lanoxx » Sat May 25, 2019 8:24 pm

Hey

I want to upgrade my printer with a dual Extruder with a 2-in and 1-out hotend. I bought this one: https://www.geeetech.com/2-in-1-out-dua ... -1038.html and also a second stepper motor and the driver.

The problem I have now is that I don´t know how i have to reprogram my printersoftware. I need two steppers but only one thermistor.

Do you have any ideas how to do this?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Upgrade I3 Pro W to dual Extruder

Post by William » Mon May 27, 2019 9:30 am

Hi, maybe you can refer to this :http://www.geeetech.com/forum/viewtopic ... 13&t=17887
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply